SuzukiSavage.com - K&N Drop-In (SU-6595) Air Filter Fitment?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › K&N Drop-In (SU-6595) Air Filter Fitment?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

K&N Drop-In (SU-6595) Air Filter Fitment? (Read 134 times)

Digger

Serious Thumper
2005 No Login

Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male

K&N Drop-In (SU-6595) Air Filter Fitment?
06/20/15 at 17:34:39

Hello all,

Simple question:

Does the K&N cartridge ("drop-in") air filter (SU-6595) fit well with no air leaks?

I've done an extensive search here and cannot find enough data to answer this question to my satisfaction.

I see that Justin tried one a while back and found that it was letting dirt in around the seal. A good data point, to be sure, but I need more of said data points...

I'm not interested in a discussion about the filtering ability of K&N air filters. I'm not interested in a discussion about the price of K&N air filters. I'm not interested in the performance impacts of K&N air filters. These discussions have already been had on our forum.

I just need to know if I can expect a good seal out of the thing!

TIA!

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com

IP Logged

old.indian Serious Thumper Offline Fighting Foreign Terrorism since 1492 Posts: 975 Central New Mexico Gender:	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #1 - 06/20/15 at 18:14:10 That filter fit perfectly in my 2006. (I have been given to understand that there were no differences in the air box between the '01 and the '06, so it should fit perfectly in yours also.) It even came with the bracket and screw in the box.
Back to top	« Last Edit: 06/20/15 at 20:01:09 by old.indian » Lectron carb, modified head, stage 3 cam, Wiseco piston, header and Dyna, Varsi's cam chain adjuster, head plug and drilled rotor, Tkat, 12" shocks and 17/43 chain conversion.EdL's 4"FCs IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #2 - 06/20/15 at 18:26:24 It did solve, with time and epoxy,,, I still wish I hadn't. The filtration, hassle, cost, I just don't know if it's worth it.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28834
L.A. California
Gender: male

Re: K&N Drop-In (SU-6595) Air Filter Fitment?
Reply #3 - 06/20/15 at 19:05:10

The stock air filter has a skinny foam seal, whereas the K&N has a large rubber seal that you have to compress to get in at the back, then shove in when you screw in the front. Got mine second hand so I don't know if it comes with a bracket. But that's what you need, an L shaped bracket to pull in the seal and hold it in place.

Versey's Place
Tech Section Index

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #4 - 06/20/15 at 19:34:49 mine had no bracket...
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #5 - 06/22/15 at 13:41:20 OK, so far I see that only three people on here have any first-hand experience with the K&N cartridge filters. Two of those three report some type of fitment problem. Hmmm......
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28834 L.A. California Gender:	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #6 - 06/22/15 at 14:10:16 Didn't have a problem once a made a bracket which is what OI says it comes with now.
Back to top	Versey's Place Tech Section Index IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #7 - 06/23/15 at 10:07:15 verslagen1 wrote on 06/22/15 at 14:10:16: Didn't have a problem once a made a bracket which is what OI says it comes with now. Thanks, Ver, for clarifying that point...I'd missed it! Anyone else out there who has first-hand experience with the fitment of K&N cartridge-type air filters?
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

pg Serious Thumper Offline Posts: 5273 In Transit	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #8 - 06/23/15 at 14:02:57 I've had one for years. I got a piece of metal about an 1.5 inches long to hold the filter in place. At least it secures the one side. I use the hole where the OEM filter is secured. I think I had it that way for 6 years... Best regards,
Back to top	I don't make the rules, I just know what they are..... IP Logged

ls650v Junior Member Offline 97 savage Posts: 73 Clinton Twp, MI Gender:	Re: K&N Drop-In (SU-6595) Air Filter Fitment? Reply #9 - 06/24/15 at 02:23:55 Digger, I have had mine for quite a few years now. It did come with a bracket. The filter itself did not fit the airbox opening properly. I had to trim a little off the top and add shims at the bottom to completely cover the airbox opening. I would not purchase this filter again.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home