maddmatt8705 wrote on 06/02/15 at 06:18:43:Did check a lot if stuff last night . Is the clutch safety and neutral safety the same? if so I checked that and continuity test good on it. But I did forget the kick stand switch. But shouldn't it still try if the bike is in neutral?
yes if the kickstand is up. no if down.
if you got a voltmeter, pull the clutch safety switch connector.
With the VOM on vdc, connect the black lead to a good ground.
and stick the red probe in one of the sockets of the connector.
with ignition on, push the start button and you should read 12 on the meter. if not, try the other.
if not there's your problem. check both control connectors.
if still no joy, pull the right control connector. look for the yellow/green and orange/white wires, with the VOM on ohms, put the probes on those 2 wires and press the start button.