Hello all and thanks in advance for the help.

I have gone ahead and eliminated my stock airbox. I've done the standard mod - cone air filter to the carb and small cone filter on the hose to the airbox.

I know this is the standard approach, but I am wanting to eliminate the small cone filter. I was wondering if anyone has had success running the hose back into the main air filter. I'm looking for a filter with some sort of an inlet nipple.

Has anyone done this? Am I crazy?

In my build I made a small metal box from 2" square tubing that sits on the flat spot on the muffler mount.  The box has the inlet cut long and goes near the bottom of the box, the outlet is shorter near the top of the box, and a drain on the bottom and it is filled with stainless steel scrubbies.  I run the cylinder breather hose to the long inlet, and the other one is connected to the hose that goes between the air cleaner and carb - I installed a nipple in the bottom of the rubber hose .

The engine breather vents down to box, extra oil/water vapors are deposited on the scrubbies and stay in the box, and the the air goes up to the air inlet and is burned in the cylinder.

Box before I welded on the end cap


Completed box before paint, and mounted on muffler mount.


Gryobob also ran a vent to the air filter on his RYCA build, and you can find it in post #130 in his build thread in the Bike Builds Sticky at the top of the Rubber Side Down page.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304722902/120  

why did you go to the trouble of building this box Dave? Is there a chance the crankcase breather can clog up the air filter if you just connect them straight together?