SuzukiSavage.com - Custom disc manufacturer

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Custom disc manufacturer 03/18/15 at 15:38:27 I think someone gave me some info on a disc manufacturer here in CA. I've lost the info... help. thinking it was in santa fe springs.
Back to top	Versey's Place Tech Section Index IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18098 Camp Springs, Kentucky Gender:	Re: Custom disc manufacturer Reply #1 - 03/19/15 at 03:03:22 I am pretty sure it was these folks. http://www.allamericanwheel.com/index.html
Back to top	Someday I will be old......But not today! IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Custom disc manufacturer Reply #2 - 03/19/15 at 07:15:16 Thanks Dave
Back to top	Versey's Place Tech Section Index IP Logged

TNelsonFLA YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13 Sunny South Florida Gender:	Re: Custom disc manufacturer Reply #3 - 03/20/15 at 08:41:23 So you can get custom made vented, floating front brake rotor for $75 ($55 rotor& $20 tool)? Which one? The 11 1/2" or 11.8"?
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18098
Camp Springs, Kentucky
Gender: male

Re: Custom disc manufacturer
Reply #4 - 03/20/15 at 09:04:47

TNelsonFLA wrote on 03/20/15 at 08:41:23:

So you can get custom made vented, floating front brake rotor for $75 ($55 rotor& $20 tool)? Which one? The 11 1/2" or 11.8"?

No...you aren't going to be that lucky. All those cheap prices are for parts that bolt on to Harley's.

The stock Savage rotor is 260mm (10.245"), and has only 4 bolts mounting the disc to the hub.

You would have to contact them to see what it would cost to have them make something for you.

Back to top

Someday I will be old......But not today!

IP Logged

TNelsonFLA YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13 Sunny South Florida Gender:	Re: Custom disc manufacturer Reply #5 - 03/20/15 at 09:12:27 Dang! will now to decide between the EBC vented rotor or pony up for the Ryca unit I saw posted.
Back to top	« Last Edit: 03/20/15 at 10:23:02 by Dave » IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: Custom disc manufacturer
Reply #6 - 03/20/15 at 10:20:20

I did contact them...
Quote:

We offer rotor blanks, 11-1/2, 11.8 5mm, 11.8 7mm, 13" and 16" for motorcycles only.

Their site says...

Sizes:
11-1/2” • 11.8”, 5mm • 11.8”, 7mm • 13” • 16"

all their discs show a hub pattern that looks like a harley.

and in another email they said...
Quote:

Our rotors come with center bore, bolt holes with your choice of vented or non-vented only.

Back to top

Versey's Place
Tech Section Index

IP Logged

Tocsik

Serious Thumper

Offline

the singularity

Posts: 1161
Denver, CO
Gender: male

Re: Custom disc manufacturer
Reply #7 - 03/20/15 at 12:38:53

How many miles should we get out of our front rotor?
I know, Iknow... riding style, weight etc will dictate...
But, what's a ballpark?

When I bought my bike in June of '14 it was an '08 with 2700 miles on it. Front brakes squealed like a stuck pig. I immediately put new pads on it with some brake grease and it was quiet (I sanded the rotor a little, too). about 2,000 miles later I had to take it all apart and clean everything up because the brake squeal came back so bad. I have 7k on her now and have just given up on having a bike that doesn't have a noisy drive belt and noisy brakes but it really takes a little enjoyment out of the ride.
Been thinkin' of just replacing the rotor or cleaning it up real good with emery cloth. Any suggestions? Is this the EBC youz guyz are talkin' 'bout? http://www.chaparral-racing.com/Product/ebc-street-bike-brake-rotor/361-0663....

Back to top

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18098 Camp Springs, Kentucky Gender:	Re: Custom disc manufacturer Reply #8 - 03/20/15 at 12:48:20 That is some fancy link you provided...it blasts me clear out of the forum, and takes me to a nowhere land! The EBC Organic pads are the pads that seem to work best on the stock rotor. Mine have never been noisy...no matter how hard I ride. They seem to be pretty easy on the rotor as well.
Back to top	Someday I will be old......But not today! IP Logged

TNelsonFLA YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13 Sunny South Florida Gender:	Re: Custom disc manufacturer Reply #9 - 03/20/15 at 12:48:55 EBC makes a vented front brake rotor, just look for #MD3017ls. Several websites and eBay have them listed.
Back to top	IP Logged

Tocsik Serious Thumper Offline the singularity Posts: 1161 Denver, CO Gender:	Re: Custom disc manufacturer Reply #10 - 03/20/15 at 12:49:13 Well heck, that's what I put on there, the organics. I think I fixed the link.
Back to top	'08\|Raptor\|Dyna\|Stock jets & no other carb changes @ 5280' alt\|'slavy CCT\|Kawa front pulley\|130/90 rear tire\|7" LED headlight\|3" straight risers\|FIAMM El Grande horns\|Mutazu hard bags IP Logged

v-pilot Senior Member Offline Loud bikes rule! Posts: 257 Rexford NY Gender:	Re: Custom disc manufacturer Reply #11 - 03/20/15 at 14:34:31 I have a factory disc that I drilled and never used if any one's interested
Back to top	Suzuki DR650, aprilia RSVR, aprilia Falco, Bimota DB4(2x) Moto Guzzi V10, Ducati 900ss, Triumph Trident, Suzuki LS650 Moto Guzzi Le Mans SE(2x), Moto Guzzi V50, Benelli 250, Ducati 250 IP Logged