SuzukiSavage.com - Wiring help

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Wiring help

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Wiring help (Read 95 times)

corey v84 Junior Member Offline SuzukiSavage.com Rocks! Posts: 60	Wiring help 03/10/15 at 17:44:48 well I want to remove the decomp system, both safety's, and have a simple wiring harness, just what it needs run and have taillight and brake light..anyone have a simple diagram? I know I can search but didn't see what I was looking for
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28651 Tucson Az Gender:	Re: Wiring help Reply #1 - 03/10/15 at 17:51:30 Try the link to the Tech Section... It's in my sig... ...and it has a table of contents... http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1173898705
Back to top	Ludicrous Speed !... ... ... IP Logged

corey v84 Junior Member Offline SuzukiSavage.com Rocks! Posts: 60	Re: Wiring help Reply #2 - 03/10/15 at 18:34:59 Will this work my bike, mines a 06
Back to top	IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: Wiring help Reply #3 - 03/10/15 at 19:58:24 They're all pretty much the same but the wiring colors may be different.
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

corey v84 Junior Member Offline SuzukiSavage.com Rocks! Posts: 60	Re: Wiring help Reply #4 - 03/19/15 at 15:24:02 Ok so what I'm trying to understand is how to do it..do I cut everything out and start all over or take the harness and go through it?? Would be nice if someone made a step by step on how to do this, I would even donate the harness to do so
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Wiring help Reply #5 - 03/19/15 at 15:33:44 Unless you know what you're doing be careful about hacking on the harness. Never throw anything away before you've achieved the goal. Do you have tools for harness work?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18098 Camp Springs, Kentucky Gender:	Re: Wiring help Reply #6 - 03/19/15 at 16:14:37 corey v84 wrote on 03/19/15 at 15:24:02: Would be nice if someone made a step by step on how to do this, I would even donate the harness to do so Well....why shouldn't that someone be you?
Back to top	Someday I will be old......But not today! IP Logged

mechanikhan YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 10	Re: Wiring help Reply #7 - 03/19/15 at 16:45:15 If you are going to do any wiring, I recomend having a manual in front of you. The Clymers manual shows the wires in color. Spend some time to familiarize yourself with it before you change anything.
Back to top	IP Logged

corey v84 Junior Member Offline SuzukiSavage.com Rocks! Posts: 60	Re: Wiring help Reply #8 - 03/19/15 at 16:46:02 I would Dave but I'm not good at doing that, so pretty much just go wire by wire? Or start from scratch? My dad loves electrical so he is gonna help..
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Wiring help Reply #9 - 03/19/15 at 17:04:55 I'd get a harness, modify it, install it...
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home