SuzukiSavage.com - jets

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › jets

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

jets (Read 74 times)

bobdog Junior Member Offline SuzukiSavage.com Rocks! Posts: 71 Bremerton, Wa. Gender:	jets 02/26/15 at 16:51:46 If my bike seems to like the larger pilot and main jets is it possible that lowering the needle a couple of washes compared to nothing over the clip ??
Back to top	2009 red w/white,emgo short vintage style muffler , carb spacer mod. 2 washers. raptor petcock, 4" uni pod filter and 50.pilot, 150 main . IP Logged

corey v84 Junior Member Offline SuzukiSavage.com Rocks! Posts: 60	Re: jets Reply #1 - 02/26/15 at 16:56:55 If you lower the neddle it leans the bike out
Back to top	IP Logged

corey v84 Junior Member Offline SuzukiSavage.com Rocks! Posts: 60	Re: jets Reply #2 - 02/26/15 at 17:01:57 http://www.carbparts.com/keihin/needles_tuning/jet_needle_changes.htm
Back to top	IP Logged

bobdog Junior Member Offline SuzukiSavage.com Rocks! Posts: 71 Bremerton, Wa. Gender:	Re: jets Reply #3 - 02/26/15 at 17:04:35 Yes , thanks ! but will it help to smooth out the pull from 4500 to 5500 rpm . there's a small hesitation just after 4 grand with no spacers ?
Back to top	2009 red w/white,emgo short vintage style muffler , carb spacer mod. 2 washers. raptor petcock, 4" uni pod filter and 50.pilot, 150 main . IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: jets Reply #4 - 02/26/15 at 17:18:25 Probably... best way to know is try it. You can always change it back...
Back to top	Ludicrous Speed !... ... ... IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18099 Camp Springs, Kentucky Gender:	Re: jets Reply #5 - 02/27/15 at 02:57:02 bobdog wrote on 02/26/15 at 17:04:35: Yes , thanks ! but will it help to smooth out the pull from 4500 to 5500 rpm . there's a small hesitation just after 4 grand with no spacers ? That sounds like the rpm is a bit high for the needle......but it really depends on where you have the throttle.
Back to top	carb_circuits.JPG Someday I will be old......But not today! IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home