SuzukiSavage.com - Tool box cover latch

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Tool box cover latch

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Tool box cover latch (Read 46 times)

Datpoolboy

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 16
Shreveport Louisiana
Gender: male

Tool box cover latch
01/21/15 at 06:36:59

I have the cover with the lock on it and the black plate that holds the battery in that the cover mounts on but I don't know what the lock actually latches onto. I realize what turns in the lock itself to "hook" behind something but I am apparently missing what the lock is supposed to latch on. Can someone post close up pictures of the whole setup with the lid on and off so I can figure out what I am missing and need to replace/fabricate?

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18098
Camp Springs, Kentucky
Gender: male

Re: Tool box cover latch
Reply #1 - 01/21/15 at 06:39:45

When you need to see how things fit together....go to an online parts supplier and look at the parts diagram.

You need part #18 in the following diagram.

http://www.hondaofflorence.com/fiche_section_detail.asp?section=432144&catego...

The #15 screws go through this latch, and they also hold the battery in place by holding part #11 against the battery.

Someday I will be old......But not today!

IP Logged

Datpoolboy YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 16 Shreveport Louisiana Gender:	Re: Tool box cover latch Reply #2 - 01/21/15 at 08:58:13 Thanks Dave, I guess i had a brain fart. The parts diagram never even crossed my mind. Thats exactly what I need.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home