Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Setting ODO on Trailtech Vapor (Read 72 times)
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 17732
Camp Springs, Kentucky
Gender: male
Setting ODO on Trailtech Vapor
11/19/14 at 06:11:06
 
If you buy a new or used TrailTech Vapor, it is possible to set the ODO reading to match the mileage on the bike.  This will allow you to keep the accurate count of the total mileage on the bike.

Here is the process sent to me by the Trail Tech technician:

Vapor ODO reset

     Press and hold all three buttons down for three seconds to enter the data setting mode. Once there using the mode button progress to the tire size. At the tire size enter 9110 using the left and right had buttons to increment the digits. Immediately after entering the new tire size press and hold the right hand button down for three second. This should move to a screen with ( 12HR ) flashing on it. If this is displayed you are in the permanent data set so any alterations will be saved to the permanent information. Once in this data set again using the mode button move to desired screen in this case the screen that reads ODO for odometer. Finally using the left and right buttons again alter the ODO to desired mileage. Once complete you can either wait for five seconds and let the Vapor revert back to the main screen or you can use the mode button to reach the main screen. Resetting the proper tire size is not needed since the Vapor with automatically default back to the values you had set prior to this adjustment.
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
eruby
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 26
Upstate South Carolina, USA
Re: Setting ODO on Trailtech Vapor
Reply #1 - 11/20/14 at 05:49:51
 
Dave wrote on 11/19/14 at 06:11:06:
At the tire size enter 9110 using the left and right had buttons to increment the digits.

You mean 2110 not 9110. Shocked
Back to top
 
 

2000 Savage
Raptor Petcock Upgrade
#7 Stopper Seat Lift
Otherwise Stock
  IP Logged
youzguyz
Serious Thumper
*****
Offline



Posts: 2509
San Antonio, Texas
Gender: male
Re: Setting ODO on Trailtech Vapor
Reply #2 - 11/20/14 at 06:03:25
 
eruby wrote on 11/20/14 at 05:49:51:
Dave wrote on 11/19/14 at 06:11:06:
At the tire size enter 9110 using the left and right had buttons to increment the digits.

You mean 2110 not 9110. Shocked


He means 9110.  It is the super secret tire size/password to set things that should not be normally set.

He also said:
Quote:
Resetting the proper tire size is not needed since the Vapor with automatically default back to the values you had set prior to this adjustment.
Back to top
 
 

2002 - Silver (Thumper)
2000 - Green (Mad Hamish)
Most motorcycle problems are caused by the nut between the seat and the handlebars. Make sure yours isn't too tight or too loose.
  IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 17732
Camp Springs, Kentucky
Gender: male
Re: Setting ODO on Trailtech Vapor
Reply #3 - 11/20/14 at 08:00:24
 
Yep....The Super Secret password must be 9110.

Don't tell anybody! Roll Eyes
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/28/24 at 05:45:01



General CategoryTechnical Documents/Reference › Setting ODO on Trailtech Vapor


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.