SuzukiSavage.com

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › gaskets

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

gaskets (Read 50 times)

bobdog Junior Member Offline SuzukiSavage.com Rocks! Posts: 71 Bremerton, Wa. Gender:	gaskets 11/13/14 at 20:21:20 where's the best place to buy gaskets ?
Back to top	2009 red w/white,emgo short vintage style muffler , carb spacer mod. 2 washers. raptor petcock, 4" uni pod filter and 50.pilot, 150 main . IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: gaskets Reply #1 - 11/13/14 at 20:26:15 Depending on what you need. I can get side cover gasket cut while I wait,locally,cheap
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

bobdog Junior Member Offline SuzukiSavage.com Rocks! Posts: 71 Bremerton, Wa. Gender:	Re: gaskets Reply #2 - 11/13/14 at 20:30:39 clutch cover gasket
Back to top	2009 red w/white,emgo short vintage style muffler , carb spacer mod. 2 washers. raptor petcock, 4" uni pod filter and 50.pilot, 150 main . IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: gaskets Reply #3 - 11/13/14 at 20:33:03 Call around local independent bike shops. And the Suzuki,of course
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28387
Tucson Az
Gender: male

Re: gaskets
Reply #4 - 11/13/14 at 21:06:46

I bought a sidecase gasket on e-bay... nicely cut, but would not seal... even at torques more than double... it was just too thick and porous...
I ended up buying factory original...

They did refund my money,... but, I had to do the job 3 times...
Using the factory gasket,.. everything sealed up perfect, no problem...
Wish I'd spent the extra $20 in the first place...

If the job is a hassle,... don't skimp... Wink

...

Ludicrous Speed !... ... Huh

...

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: gaskets Reply #5 - 11/13/14 at 22:41:09 Imagine a printer,but instead of printing,it runs a stylus, cutting the gasket out,off a roll. The difference is,this place Uses that to make the gaskets they need. Been a few years, I spent 14ish bux,, And they don't have the factory oil control bead of goo. I had no real problem. I don't use rtv on this kinda stuff.. Three Bond, Yamabond,,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home