SuzukiSavage.com - 2 wire turn signals

Ap5112 Full Member Offline SuzukiSavage.com Rocks! Posts: 183	2 wire turn signals 07/24/14 at 18:11:39 Is there a way to make two wire turn signal work both as running lights and turn signals?
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28633 Tucson Az Gender:	Re: 2 wire turn signals Reply #1 - 07/24/14 at 18:57:08 Nope... well, maybe with ridiculous effort and expense... The cheaper easier way, is to change the socket to one that accepts a dual filament bulb... ...(that's what I did to get my stop/tailights)... changed from 1156 sockets to 1157 sockets...
Back to top	Ludicrous Speed !... ... ... IP Logged

stewmills

Serious Thumper

Offline

Imagination is more
important than
knowledge

Posts: 2641
Auburn, AL
Gender: male

Re: 2 wire turn signals
Reply #2 - 07/24/14 at 19:33:33

Serowbot wrote on 07/24/14 at 18:57:08:

The cheaper easier way, is to change the socket to one that accepts a dual filament bulb...
...(that's what I did to get my stop/tailights)... changed from 1156 sockets to 1157 sockets...

Can you 'splian this? If you are saying that you changed the socket on your turn signals to 1157 and used a dual filament bulb it turns the rear turn signals into running lights and they still go 'blinky blinky' when you turn on the blinker, then I wanna do this. Seems I recall someone saying doing that was illegal...but if it is I wanna do it even more Shocked

Back to top

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: 2 wire turn signals Reply #3 - 07/24/14 at 19:40:41 buy an old set of fronts, pull out the socket (yes it does come out), do the same with your rears, push in the new sockets. I'm not sure you can do this with the new style bullets, but ya can with the old lolly pops. ta da... you got 2 filly rears. How to make it legal? get red lenses.
Back to top	Versey's Place Tech Section Index IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2641 Auburn, AL Gender:	Re: 2 wire turn signals Reply #4 - 07/24/14 at 20:06:38 so this is, i assume, new style bullets? i like the idea if it anyone has found out it works with these. i have a 2008. can you buy red lenses for these?
Back to top	KINDLE_CAMERA_1404511446000.jpg 2008 \| 152/52.5–Air Mix 3/4 \| Rotella T4 \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: 2 wire turn signals Reply #5 - 07/24/14 at 22:37:25 kuryakyn has clear lenses, you would just need a red bulb. http://www.kuryakyn.com/Products/735/Clear-Red-Replacement-Turn-Signal-Lenses
Back to top	Versey's Place Tech Section Index IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: 2 wire turn signals Reply #6 - 07/24/14 at 23:55:55 Bullet lights with red glass lenses from J&P Cycles. 1007 bulb (1157 with half size globe). One wire is run, one wire is turn, grounds through the mount. Like these, but with red lenses... ... yep, that's the back end of my perpetual project 98 Savage... neighbor backed into it with a dually... :'(
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

Demin Serious Thumper Offline We need more chlorine in the gene pool Posts: 2435 Warren,Ohio Gender:	Re: 2 wire turn signals Reply #7 - 07/25/14 at 05:40:55 All of the two wire ones I use are dual filament.The rears I usually hook the"run" side of them to my brake light,so I have 3 brake lights.And the brighter side as turn signals.
Back to top	Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE finish '77 Yamaha XS650 bobber Bought another one finish'79 Harley custom bobber(NEXT) IP Logged

YoungSavage

Junior Member

Offline

everyone knows I'm
home by the KA-POW!

Posts: 89
Monterey, California
Gender: male

Re: 2 wire turn signals
Reply #8 - 07/25/14 at 08:59:41

Demin wrote on 07/25/14 at 05:40:55:

All of the two wire ones I use are dual filament.The rears I usually hook the"run" side of them to my brake light,so I have 3 brake lights.And the brighter side as turn signals.
http://www.vtwinmfg.com/WebPics/33/33-0665.jpg

Demin, did you by chance buy those from ebay? I may need to switch my wiring if you did. I have them just as a turn right now.

Back to top

1988 Stock, mixture screw out 2 turns, seat lift mod, elevation= sea level, main jet=155 pilot jet=55

IP Logged

Demin Serious Thumper Offline We need more chlorine in the gene pool Posts: 2435 Warren,Ohio Gender:	Re: 2 wire turn signals Reply #9 - 07/25/14 at 18:33:31 I get mine through V-TWIN.But they're probably the same ones.Both wires are hot.Body of the light is the ground on these.
Back to top	Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE finish '77 Yamaha XS650 bobber Bought another one finish'79 Harley custom bobber(NEXT) IP Logged

YoungSavage Junior Member Offline everyone knows I'm home by the KA-POW! Posts: 89 Monterey, California Gender:	Re: 2 wire turn signals Reply #10 - 07/26/14 at 17:37:08 How would someone test these lights to figure out of they were wired for running lights or not?
Back to top	1988 Stock, mixture screw out 2 turns, seat lift mod, elevation= sea level, main jet=155 pilot jet=55 IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28633 Tucson Az Gender:	Re: 2 wire turn signals Reply #11 - 07/26/14 at 17:41:55 Just take out the bulb and see if it has two filaments... No bulb?... look in the socket to see if it has two contacts on the base...
Back to top	Ludicrous Speed !... ... ... IP Logged

YoungSavage Junior Member Offline everyone knows I'm home by the KA-POW! Posts: 89 Monterey, California Gender:	Re: 2 wire turn signals Reply #12 - 07/26/14 at 17:52:25 Thanks serow! Actually going to go check right now.
Back to top	1988 Stock, mixture screw out 2 turns, seat lift mod, elevation= sea level, main jet=155 pilot jet=55 IP Logged

Ap5112 Full Member Offline SuzukiSavage.com Rocks! Posts: 183	Re: 2 wire turn signals Reply #13 - 07/27/14 at 03:06:38 Mine only has on contact this sucks cause I just bought these lights I wish I would have researched before I bought
Back to top	IP Logged

WD

Serious Thumper
2005 No Login

Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male

Re: 2 wire turn signals
Reply #14 - 07/27/14 at 07:35:15

In a way, one wire signals are preferable to dual wire turn signals. Especially in the smaller versions... you can buy a half size 1156 pretty much anywhere, any day, any time, for almost nothing. Half size 1157s on the other hand generally have to be ordered in at the parts store or purchased online. Either way, 99% of the time, you will be waiting for replacement 1007 bulbs.

Back to top

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom

IP Logged