Jsud04
Full Member
Offline
SuzukiSavage.com Rocks!
Posts: 223
|
So I ended up going a bore up to 96mm...
When I put the gasket for the jug to case, should I give the jug and case a thin layer of rtv and a gasket, to ensure its not gonna leak. I cleaned the old paper gasket off with a scrapper, lightly razored it, lightly touched it up with 800 and then 2000 grit. Its as clean as I can get it and my .0025 feeler can't get between the two without a gasket in.
|