SuzukiSavage.com - Pilot Jet Stripped

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Pilot Jet Stripped

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Pilot Jet Stripped (Read 39 times)

RangerRide YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 18	Pilot Jet Stripped 07/19/14 at 14:54:31 I just got my carb off to change the jets out. It appears the previous owner attempted to take the pilot jet out previously. The groove has been stripped. I tried one time to get it but don't want to make it worse before checking here. Any suggestions?
Back to top	IP Logged

Tocsik Serious Thumper Offline the singularity Posts: 1163 Denver, CO Gender:	Re: Pilot Jet Stripped Reply #1 - 07/19/14 at 15:52:46 I would say you could use a screw extractor; very carefully! The jets are brass so it should bite pretty good.
Back to top	'08\|Raptor\|Dyna\|Stock jets & no other carb changes @ 5280' alt\|'slavy CCT\|Kawa front pulley\|130/90 rear tire\|7" LED headlight\|3" straight risers\|FIAMM El Grande horns\|Mutazu hard bags IP Logged

rapfohl YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 24	Re: Pilot Jet Stripped Reply #2 - 07/19/14 at 16:04:46 Just did the same exact thing. Get a really small screw extractor and just tap it down into the hole and back it out. Easy cause of the brass.
Back to top	IP Logged

rapfohl YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 24	Re: Pilot Jet Stripped Reply #3 - 07/19/14 at 18:44:05 rapfohl wrote on 07/19/14 at 16:04:46: Just did the same exact thing. Get a really small screw extractor and just tap it down into the hole and back it out. Easy cause of the brass. Edit: I just checked and I used the screw extractor I used was a #1 extractor.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home