SuzukiSavage.com - motor mount numbers and vibration????

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › motor mount numbers and vibration????

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

motor mount numbers and vibration???? (Read 78 times)

lnewlf

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 13

motor mount numbers and vibration????
07/06/14 at 11:09:13

I want to say great site for the bike. The info on here has help my transformation with my $600 purchase. I have ran into a problem with excessive vibration between 62-70mph or 4200-5000rpm. Checked all motor mounts. But I am confused which torque on each. For example the top 2 are frame and one is motor. Thru mounts front controls at 64.9 ft/lbs seems real tight. Could someone post a picture and label the torque for each? I know this is asking alot but it would help everyone. Also i did check torque list post it just made me scratch my head even more. Undecided

IMG_20140421_105402_466.jpg

IP Logged

lnewlf YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Re: motor mount numbers and vibration???? Reply #1 - 07/06/14 at 11:11:17 Here is a photo of where I am now.
Back to top	IMG_20140601_130830_799.jpg IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: motor mount numbers and vibration???? Reply #2 - 07/06/14 at 11:14:10 YOU checked the pegs? They go through the motor.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

lnewlf YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Re: motor mount numbers and vibration???? Reply #3 - 07/06/14 at 11:16:55 Yes. I called them the forward controls at 64.9 ft/lbs.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: motor mount numbers and vibration???? Reply #4 - 07/06/14 at 11:20:34 Well,the top mounts are visible so I'm sure you got that... I'm sorry,I don't know what else to do. Just hang out, someone will have something to add.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

lnewlf YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Re: motor mount numbers and vibration???? Reply #5 - 07/06/14 at 11:24:54 Thanks. I am baffled
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: motor mount numbers and vibration????
Reply #6 - 07/06/14 at 11:39:55

This is the way I interpret it.

ITEM N-m | ft-lb
These are on top of the head - all 3
Engine mounting No. 1 bolts and nuts 37.0 45.0 | 27.3 33.2

Footpegs
Engine mounting No. 2 bolt 70.0 88.0 | 51.6 64.9

thru frame
Engine mounting No. 3 bolts and nuts 70.0 88.0 | 51.6 64.9

rear engine plate
Engine mounting No. 4 bolt and nut 70.0 88.0 | 51.6 64.9

frame to rear engine plate
Engine mounting No. 5 Allen 20.0 30.0 | 14.7 22.1

Basically, the smaller ones get 30 ft-lbs, the bigger get 60 ft-lbs, and the allens get 20 fl-lbs.

Versey's Place
Tech Section Index

IP Logged

lnewlf

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 13

Re: motor mount numbers and vibration????
Reply #7 - 07/06/14 at 12:06:12

Oh. I did 64.9 on the top bolts and broke one then replaced and retorqued. Do you think this might add to the vibration issue since it is too tight? The top mount bolt that attaches the head was torqued probably around 50ft/lbs I was affraid ti break another and not to mention the aluminum casting. What do you think is the best option for me? Retorque the mounts all around?

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: motor mount numbers and vibration???? Reply #8 - 07/06/14 at 14:05:23 leave it, damage done, it may break next time or not ever. too tight will be better for vibration.
Back to top	Versey's Place Tech Section Index IP Logged

lnewlf YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Re: motor mount numbers and vibration???? Reply #9 - 07/06/14 at 14:42:44 Thanks. I will leave until something happens.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home