SuzukiSavage.com - cam chain tensioner

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › cam chain tensioner

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

cam chain tensioner (Read 55 times)

Steddy58 Full Member Offline Ooops I did it again Posts: 240 Liverpool UK Gender:	cam chain tensioner 06/21/14 at 06:50:10 Hi, I'm going to replace the cam chain adjuster with one of Verslagens specials and I was wondering if I have to empty all the oil and if I do can I re-use it as I've only just replaced it ( with an expensive one ) - logic tells me yes, but logic tells me a lot of things which are bollox , cheers have a good one all
Back to top	1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: cam chain tensioner Reply #1 - 06/21/14 at 07:45:58 Sure,... drain it, and reuse it... (clean pan please)... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

Steddy58 Full Member Offline Ooops I did it again Posts: 240 Liverpool UK Gender:	Re: cam chain tensioner Reply #2 - 06/21/14 at 07:50:01 cheers Serowbot, clean pan at the ready
Back to top	1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: cam chain tensioner Reply #3 - 06/21/14 at 09:23:21 tip it 45° and you won't loose more than tablespoon.
Back to top	Versey's Place Tech Section Index IP Logged

YoungSavage Junior Member Offline everyone knows I'm home by the KA-POW! Posts: 89 Monterey, California Gender:	Re: cam chain tensioner Reply #4 - 06/21/14 at 09:30:00 Agreed on the tilting. Had to open my case back up after the clutch cover cracked. Whole thing is sitting with oil at the ready right now..... covered so dirt doesn't get in of course.
Back to top	1988 Stock, mixture screw out 2 turns, seat lift mod, elevation= sea level, main jet=155 pilot jet=55 IP Logged

Steddy58 Full Member Offline Ooops I did it again Posts: 240 Liverpool UK Gender:	Re: cam chain tensioner Reply #5 - 06/21/14 at 10:54:43 That would be handy - how would you achieve that safely and without damage and would you need to remove filter and cover first or would they be kept in place
Back to top	1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home