SuzukiSavage.com - Where do these go?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Where do these go?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Where do these go? (Read 77 times)

Trouble YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 10	Where do these go? 06/17/14 at 15:53:07 Had a couple little parts show up on the bench while working on my motor. No clue what they came out of though.
Back to top	IMG_20140617_150746.jpg IP Logged

engineer Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 872 Gender:	Re: Where do these go? Reply #1 - 06/17/14 at 17:21:46 The parts list shows a small pin and spring associated with the balancer shaft. I've never seen it. What all did you take apart? Did you split the cases? I'm certain someone here can help you, especially if they know what you had apart.
Back to top	2005 S40, Intruder shocks, Dyna, 52.5/150, 3 washers, 2 turns, modified seat, Raptor IP Logged

Trouble YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 10	Re: Where do these go? Reply #2 - 06/17/14 at 17:29:37 I haven't split the main case, but both side covers are off as well as the little shifter mechanism cover. The valve cover, head, and piston cylinder are off as well, but I'm pretty sure they didn't come out of there.
Back to top	IP Logged

engineer Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 872 Gender:	Re: Where do these go? Reply #3 - 06/17/14 at 17:43:48 In the shifter mechanism there is a shifter pawl and a spring, maybe two of them. They work with the little ratchet type thing actuated by the shift lever. Take a look at a parts diagram at bike bandit or a place like that. It would be under transmission/shifter.
Back to top	2005 S40, Intruder shocks, Dyna, 52.5/150, 3 washers, 2 turns, modified seat, Raptor IP Logged

Steve H Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1223 Spartanburg, SC Gender:	Re: Where do these go? Reply #4 - 06/17/14 at 17:57:46 It looks like part of a click detent mechanism to me. Maybe part of a pressure regulator.
Back to top	87 LS650, 2005 Ninja 250, 2009 Yamaha C3, 2001 Honda Reflex. On 2 wheels since 6/80. IP Logged

oldNslow Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2683 Rochester, NY Gender:	Re: Where do these go? Reply #5 - 06/17/14 at 18:01:01 #10 and #11 on this diagram maybe. http://www.bikebandit.com/2000-suzuki-savage-650-ls650p/o/m147741#sch243426 If you have a Clymers manual there is a better diagram on page 165
Back to top	IP Logged

stinger Serious Thumper Offline I love YaBB 1G - SP1! Posts: 848	Re: Where do these go? Reply #6 - 06/17/14 at 18:05:25 You might try researching here! https://www.motorcyclespareparts.eu/suzuki-parts/motorcycles/ls650-savage-199... I have used it alot trying to identifying parts after taking something part on my bike. I always have extra parts when I work on something. Also gives you close idea to what these parts cost.
Back to top	IP Logged

Trouble YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 10	Re: Where do these go? Reply #7 - 06/17/14 at 19:40:24 Pretty sure what I've just discovered are parts #44 & #45. Thanks for your help folks.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home