Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› White spacer size? (bought #4 but was to big?)
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
White spacer size? (bought #4 but was to big?) (Read 80 times)
doh13
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 67
NS CANADA
White spacer size? (bought #4 but was to big?)
06/03/14 at 18:32:54
Hi i went to the hardware store to pick up some #4 washers to replace the white spacer and they were too big to replace the white spacer what did I do wrong? I measured the white spacer outer diameter and it was about 1/4 inch outer diameter so i am assuming that's the size i need?
Back to top
IP Logged
S-P
Serious Thumper
Offline
Back in the saddle
again
Posts: 816
Phoenix, AZ
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #1 -
06/03/14 at 18:39:24
doh13 wrote
on 06/03/14 at 18:32:54:
Hi i went to the hardware store to pick up some #4 washers to replace the white spacer and they were too big to replace the white spacer what did I do wrong? I measured the white spacer outer diameter and it was about 1/4 inch outer diameter so i am assuming that's the size i need?
Not sure what went wrong. If you still have the white spacer take it with you, and maybe the needle to be sure the washers fit over it. You can always sand the white spacer down on a piece of 220 sandpaper on a flat surface.
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Online
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #2 -
06/03/14 at 19:25:05
#4 nylon washer are .25" or less...
Item Finish SizesInside Dia.Outside Dia.Thickness
Flat Washer Natural #4 0.112" 0.206" 0.053"
Flat Washer Natural #4 0.115" 0.250" 0.062"
Flat Washer Natural #4 0.120" 0.220" 0.031"
Back to top
Versey's Place
Tech Section Index
IP Logged
S-P
Serious Thumper
Offline
Back in the saddle
again
Posts: 816
Phoenix, AZ
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #3 -
06/03/14 at 19:28:21
verslagen1 wrote
on 06/03/14 at 19:25:05:
#4 nylon washer are .25" or less...
Item Finish SizesInside Dia.Outside Dia.Thickness
Flat Washer Natural #4 0.112" 0.206" 0.053"
Flat Washer Natural #4 0.115" 0.250" 0.062"
Flat Washer Natural #4 0.120" 0.220" 0.031"
Maybe he got metal washers and not nylon? Is there a difference in sizing?
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Online
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #4 -
06/03/14 at 19:34:03
Flat Washer Standard Plain #4 1/8" 5/16"
Flat Washer Standard Plain #4 1/8" 5/16"
you betcha.
Back to top
Versey's Place
Tech Section Index
IP Logged
doh13
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 67
NS CANADA
Re: White spacer size? (bought #4 but was to big?)
Reply #5 -
06/03/14 at 20:45:21
verslagen1 wrote
on 06/03/14 at 19:34:03:
Flat Washer Standard Plain #4 1/8" 5/16"
Flat Washer Standard Plain #4 1/8" 5/16"
you betcha.
Well there's my problem lol. The dang nylon washers are hard to come by around my area I looked at 3 places locally and nothing I am going to have my friend check home depot tomorrow if he gets the chance if not out comes the sand paper. Thanks a lot for the info.
Back to top
IP Logged
S-P
Serious Thumper
Offline
Back in the saddle
again
Posts: 816
Phoenix, AZ
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #6 -
06/03/14 at 21:03:19
Home Depot has a section with drawers of offbeat and metric stuff. Don't look in the main aisle with all the little bags of screws, nuts, bolts and washers. In that section there is a rack of gray drawers with little trays that have all kinds of nylon, rubber and metric fasteners, bolts, washers etc. They might have them in there.
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Online
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #7 -
06/03/14 at 21:26:16
stack 'm up on a screw, pinch 'm with a nut, chuck in a drill press and file to size.
Back to top
Versey's Place
Tech Section Index
IP Logged
WD
Serious Thumper
2005 No Login
Offline
Professional
"scooter
trash".
Posts: 5207
Rosemark TN
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #8 -
06/03/14 at 23:24:54
Or go to Lowes, much better hardware selection than Home Despot.
Back to top
On 2 wheels since 7/87
Black and Chrome 2003 1950s style custom
IP Logged
doh13
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 67
NS CANADA
Re: White spacer size? (bought #4 but was to big?)
Reply #9 -
06/09/14 at 19:39:05
WD wrote
on 06/03/14 at 23:24:54:
Or go to Lowes, much better hardware selection than Home Despot.
I decided to just sand down the white spacer instead of running around like a chicken with its head cut off trying to find the correct washer here in the boonies...
. I took off .5 mm of the 2.5 MM spacer which equals to a little less than 1/3 . I wanted to take less rather than more.
Anyways I took the bike for a test run with the bad float installed (waiting on new float) stock jets/air filter and air screw set to 2 turns and it worked really well with no back firing and it seemed to pull smoothly when i came on to the throttle even though this is the first time i have ridden a savage so I am not sure what I should expect but i was happy with the way it was running, hell i was happy it was even running after setting for over 7 years.
Back to top
IP Logged
S-P
Serious Thumper
Offline
Back in the saddle
again
Posts: 816
Phoenix, AZ
Gender:
Re: White spacer size? (bought #4 but was to big?)
Reply #10 -
06/09/14 at 19:46:44
Awesome! Sounds like you hit a magic combination. If it ain't broke, don't fix it... enjoy the ride!
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/22/24 at 12:32:15
›
General Category
›
Rubber Side Down!
› White spacer size? (bought #4 but was to big?)
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.