justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
SWEET!!!,, Then take the Other bolt & look, see how many threads are still in the head.. For mow, dont touch it,, just get some of that mix put together & put some on,, I like a syringe, putting a tiny drop on, letting it work in, another drop,, let it work in,, let it sit,, keep letting oil drip in, then put a flat spot on 2 sides on the bolt, get some small,, SMALL vise grips & clamp them on. TRy to tighten the thing.. Screw it back IN,, Dont go all the wway, just a few turns & stop, add oil, add oil,, wiggle it back & forth, working the threads, Keep turning it back & forth,,adding oil, any time it starts fighting, add oil, go the other way,add oil,, wiggle, wiggle, try to bring it out 1/2 turn more every time, less, okay.,, just dont get macho,, You can also get a little gas powered soldering pencil ( about $10.00 at Lowes) & heat the bolt, slap a coupla ice cubes on it & that can break scale up down inside,Id play with it with vise grips & oil, if that doesnt act promising, then heat,, Maybe someone can add something, or just plain has a better idea.. Just dont get in a hurry,, wait on others,,
|