SuzukiSavage.com - Exhaust Wrap Question (length)

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Exhaust Wrap Question (length)

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Exhaust Wrap Question (length) (Read 92 times)

sailorcolin Junior Member Offline Building a street tracker! Posts: 77 Rock Hill, SC Gender:	Exhaust Wrap Question (length) 04/22/14 at 07:07:30 How much exhaust wrap do I need to get from the head to the slip on clamp?
Back to top	99 Savage Street Tracker build. IP Logged

SteveIsGr8 Junior Member Offline SuzukiSavage.com Rocks! Posts: 91 Jamestown, NC	Re: Exhaust Wrap Question (length) Reply #1 - 04/22/14 at 11:43:56 About another foot more than you have. But really, it will depend on how much overlap you have on each wrap as well as how evenly you can wrap it around the bends. I just bought a standard roll and had more than enough.
Back to top	« Last Edit: 04/22/14 at 13:10:57 by SteveIsGr8 » IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Exhaust Wrap Question (length) Reply #2 - 04/22/14 at 12:10:40 There are 2 standard roll lengths, depending on overlap, the shorter roll is enough.
Back to top	Versey's Place Tech Section Index IP Logged

Michael L

Full Member

Offline

brumm..!

Posts: 143
Denmark
Gender: male

Re: Exhaust Wrap Question (length)
Reply #3 - 04/22/14 at 12:15:45

I have another powerwrap question, and I think theres no need to create another topic... I was thinking, since our headers gets as hot as they do, will powerwrap make things even hotter??? To my knowledge, powerwrap holds on to the heat of the header, in order to make it expand even more.

Another thing. Would it be a good idea to spray the header with zinkspray to prevent rust under the wrap?

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Exhaust Wrap Question (length) Reply #4 - 04/22/14 at 13:17:11 yes it's gonna get hot and turn purple. rust? IDK/c they said spray the wrap with waterproofing or it'll retain water and stink.
Back to top	Versey's Place Tech Section Index IP Logged

CHANMAN Junior Member Offline Sometimes you just do things Posts: 67 Arkansas Gender:	Re: Exhaust Wrap Question (length) Reply #5 - 04/24/14 at 20:45:49 I just wrapped mine last week and I sprayed it with a high temperature silicone paint. It stunk for the first few days, but the smell is beginning to fade. A guy in the parking lot at my college almost notified security thinking my bike was on fire the first day I rode with the wrap on.
Back to top	IP Logged

gizzo Serious Thumper Offline SuzukiCabbage. It's Savage. Posts: 1318 Australia	Re: Exhaust Wrap Question (length) Reply #6 - 04/24/14 at 20:56:49 I used about 6 metres x 50mm to do mine.
Back to top	IP Logged

CHANMAN Junior Member Offline Sometimes you just do things Posts: 67 Arkansas Gender:	Re: Exhaust Wrap Question (length) Reply #7 - 04/24/14 at 21:04:18 Didnt think to mention the size of my roll it was 2" wide and 25' in length and I think i had close to a foot left over after wrapping. Maybe more
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home