Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
EU vs US Savages - carb differences? (Read 122 times)
Bluesman
Full Member
***
Offline

Jack of many trades

Posts: 108
Malmö, Sweden
Gender: male
EU vs US Savages - carb differences?
04/18/14 at 23:54:38
 
Guys - there has been a hint of a discussion as to whether the carbs differ between European and US Savages. Most notably, there seems to be a difference in the idle mixture department.
I want to clear that subject up. Now:

US savages obviously have a plug that can be drilled/ripped out to gain access to the mixture screw beneath. From what I have seen when looking closely at my carb (97 EU model) it looks like I dont have a plug, at least it doesn´t look the same as the pics posted here. This makes me wonder if EU Savages come with a fixed mixture jet (anti-tampering/environmental issue, maybe).
And...I don´t fancy drilling and tearing at it until I KNOW what I am dealing with.. I suspect this might be a fixed mixture jet, screwed in and glued in place. I certainly won´t attempt to screw it out (or in) before I know. That brass is brittle....

So, you guys with EU market Savages -  (mine is imported from Germany) - have any of you found out about this? IS there a mixture screw behind what COULD be a plug? Or IS the slotted thing actually a mixture screw?

I´ll post a closeup-pic of my carb later today. Just need a refill of coffee first Smiley

I have two Savages in the garage just now, both are imports.
Mine:

Tessans:


Note that mine also has some extra "thingy" mounted to the right side of the carb..any ideas as to what it is?


(BTW...the frame number/VIN scheme also seems to differ on the EU bikes, making it almost impossible to date the bike. Our frame numbers seem to begin with the model code, and some numbers are omitted, IIRC, but that´s not important)
Mine:

Hers:
Back to top
 
 

Cheers /Richard
  IP Logged
Henrik
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 70
Sweden, Jönköping
Gender: male
Re: EU vs US Savages - carb differences?
Reply #1 - 04/19/14 at 00:58:06
 
Both me and my dad has a savage, 97 and 96. It has been no problem to turn the mixture screw, and you can hear that the idle speed differs.
Both bikes were purchased in Sweden.
You dont need to drill anything just turn the screw to set the optimun mixture for low and idle speed. BUT, be wery carefull when turning it inwards so that you do not damage screwtip since it is tiny sharp and made of brass!
Back to top
 
 
  IP Logged
Bluesman
Full Member
***
Offline

Jack of many trades

Posts: 108
Malmö, Sweden
Gender: male
Re: EU vs US Savages - carb differences?
Reply #2 - 04/19/14 at 01:22:14
 
So..you are saying that
a) your carb(s) look the same as my pics
b) the slotted brass thing IS actually the mixture screw?

That´s good news. Now, I need to find the perfect screwdriver for that slot...and yes, I´ll be careful not to mess it up Smiley

Time to get going with the Raptor petc0ck swap, and the BSM muffler swap, plus some likely rejetting Smiley
Back to top
 
« Last Edit: 04/19/14 at 05:49:03 by Bluesman »  

Cheers /Richard
  IP Logged
strang
Senior Member
****
Offline



Posts: 387
london
Gender: male
Re: EU vs US Savages - carb differences?
Reply #3 - 04/19/14 at 02:35:15
 
Yep your good to go - mine came originally from France and had no plug fitted. Im not the first owner but it wasnt jetted right so i think it was completely stock. Maybe just US models have plug cause of Cali laws. Do the Dyna  Smiley
Back to top
 
 
  IP Logged
Steddy58
Full Member
***
Offline

Ooops I did it again

Posts: 240
Liverpool UK
Gender: male
Re: EU vs US Savages - carb differences?
Reply #4 - 04/19/14 at 02:55:07
 
I bought mine in England ( not new ) and yes that slotted thing is the idle screw - the emissions laws in the US are pretty strict which is why they make it difficult to mess with. I swapped my original carb for one of Lancers carbs and put a cone filter on and after a bit of tuning with mixture screw, tickover and colour tuning have got it running sweet, very occasional backfire but I'm sure even that could be sorted if I wasn't so lazy and buggered around with the jets etc. I haven't got a clue what that extra "thingy" is Smiley
Back to top
 
 

1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles
  IP Logged
Bluesman
Full Member
***
Offline

Jack of many trades

Posts: 108
Malmö, Sweden
Gender: male
Re: EU vs US Savages - carb differences?
Reply #5 - 04/19/14 at 04:32:18
 
Well, then it seems to be established. There IS a difference. So maybe it´s time for a sticky to this theme in the tech/reference section - the disclaimer could be " PLEASE NOTE: the idle screw plug modifications described only apply to SOME country versions - check the pics below. Not all Savages have the plug. "

Thanks to all for your input/verification. This has been bothering me for some time.
Back to top
 
 

Cheers /Richard
  IP Logged
Thomas Högberg
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 61
Vårgårda, Sweden
Gender: male
Re: EU vs US Savages - carb differences?
Reply #6 - 04/19/14 at 07:43:43
 
This is how mine looked like before I lost it due to wibrations...

Hopefully will the screw I have ordered fit Wink

/Thomas
Back to top
 
 
  IP Logged
Bluesman
Full Member
***
Offline

Jack of many trades

Posts: 108
Malmö, Sweden
Gender: male
Re: EU vs US Savages - carb differences?
Reply #7 - 04/19/14 at 07:58:00
 
It´s a mystery to me, Thomas, that your bike runs at all without it, and how it could have vibrated itself loose. Well, one of life´s mysteries, I guess Smiley
Back to top
 
 

Cheers /Richard
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28344
Tucson Az
Gender: male
Re: EU vs US Savages - carb differences?
Reply #8 - 04/19/14 at 09:44:18
 
Bluesman wrote on 04/19/14 at 04:32:18:
Well, then it seems to be established. There IS a difference. So maybe it´s time for a sticky to this theme in the tech/reference section - the disclaimer could be " PLEASE NOTE: the idle screw plug modifications described only apply to SOME country versions - check the pics below. Not all Savages have the plug. "

Thanks to all for your input/verification. This has been bothering me for some time.


Wording has been added to the "Idle Mix" thread in the Tech section - Serow
Wink...
Back to top
 
 

Ludicrous Speed !... ... Huh...
  IP Logged
Thomas Högberg
Junior Member
**
Offline

SuzukiSavage.com
Rocks!

Posts: 61
Vårgårda, Sweden
Gender: male
Re: EU vs US Savages - carb differences?
Reply #9 - 04/20/14 at 13:58:24
 
Bluesman wrote on 04/19/14 at 07:58:00:
It´s a mystery to me, Thomas, that your bike runs at all without it, and how it could have vibrated itself loose. Well, one of life´s mysteries, I guess Smiley



It runs, but not at all as it should  Tongue
I think I lost it because the spring and o-ring was missing ...
previous owner you know  Wink
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/29/24 at 03:03:26



General CategoryRubber Side Down! › EU vs US Savages - carb differences?


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.