Crich422
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 43
Colorado Springs, CO
Gender:
|
Ok, so I went out with my BCB DVD and wired everything like it says. I made the pigtail so the blinkers would stay on with Key Power (I didn't have brown wire, so I used blue)
Left side: Black wire to Red Blinker wire, Black Blinker wire to Brown (blue) Key Power, and Ground to Ground
Right side: Green wire to Red Blinker wire, Black Blinker wire to Brown Key Power, and Ground to Ground
My problem is, that I have Key Power but when I connect the pigtail the blinkers don't light up like they should. They also don't blink, but thats because I don't know if they are getting power anyways... While I was doing the work, I wired in my tail light, and it works!!!! I didn't have the original connector, so I cut it off and put quick-release bullet connectors on the wires. So instead of one plug, theres now three. Now I plugged the tail light into both Key Powers, to make sure they both had power and it worked with both. Thats why Im scratching my head about the blinkers. Does all of that make sense? I don't know if I'm explaining it well enough… The pictures I took are too big to load, so ill try to figure those out later...
|