SuzukiSavage.com - Manifold bolts

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Manifold bolts

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Manifold bolts (Read 31 times)

NHLycan Junior Member Offline Nice forum! Posts: 86 New Hampshire Gender:	Manifold bolts 11/28/13 at 08:55:45 I'm putting her back together after putting on the Versy adjuster and was staring at the exhaust manifold bolts. They came out with only a little fuss but I'm not sure they're really designed for multiple uses. What's the group think? Reuse or replace? And when I put which ever ones back should I lock ease or high temp lube?
Back to top	New Hampshire. 2003 SL650. 13k miles. Raptor installed. Versy adjuster. Rotella 6 w/zinc. Idle mix plug out. Seat front up 1". Owned since July 2013. Mechanically inclined. Better cook than mechanic. IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28663 Tucson Az Gender:	Re: Manifold bolts Reply #1 - 11/28/13 at 09:27:19 I"ve reused them for 30k miles... Get them clean, use anti-seize, and don't over-tighten... I check them for snug at every oil change... ...( you might consider a new exhaust gasket... they compress upon multiple reuses)... (I have an old compressed one and a newer one on at the same time for more squish)... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home