SuzukiSavage.com - getting at the cam chain

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › getting at the cam chain

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

getting at the cam chain (Read 86 times)

anebv8 Senior Member Offline SuzukiSavage.com Rocks! Posts: 280 Rangiora,New Zealand Gender:	getting at the cam chain 11/22/13 at 23:00:04 I've decided to change the cam chain after the tensioner went south,I have a slight dilemma..I've pulled every bolt off the top of the motor I can see,only thing left attached is the carb and the spark plug,but I can't get the thing to move,have I missed something? I don't want to break any of the fins trying to get it off
Back to top	Ago Solvo Intereo Puteus IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: getting at the cam chain Reply #1 - 11/22/13 at 23:02:49 did you get all the bolts? BTW, you don't need to remove S30
Back to top	Versey's Place Tech Section Index IP Logged

anebv8 Senior Member Offline SuzukiSavage.com Rocks! Posts: 280 Rangiora,New Zealand Gender:	Re: getting at the cam chain Reply #2 - 11/22/13 at 23:12:12 yup,got all the bolts,(just took the lappy for a walk down to check ),got the 2 nuts at the front and back by where the 2 pieces attach,may have to try and get some sort of lube around the join
Back to top	Ago Solvo Intereo Puteus IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28908 L.A. California Gender:	Re: getting at the cam chain Reply #3 - 11/22/13 at 23:47:56 put a wrench on the timing bolt and turn the engine over. that should pop the cover off if the all the bolts are off. just make sure to return it to TDC on the compression stroke. or the cover will be hard to put back on.
Back to top	Versey's Place Tech Section Index IP Logged

anebv8 Senior Member Offline SuzukiSavage.com Rocks! Posts: 280 Rangiora,New Zealand Gender:	Re: getting at the cam chain Reply #4 - 11/22/13 at 23:52:21 verslagen1 wrote on 11/22/13 at 23:47:56: put a wrench on the timing bolt and turn the engine over. that should pop the cover off if the all the bolts are off. just make sure to return it to TDC on the compression stroke. or the cover will be hard to put back on. oh,cool,thanks for that,will try tomorrow
Back to top	Ago Solvo Intereo Puteus IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18142 Camp Springs, Kentucky Gender:	Re: getting at the cam chain Reply #5 - 11/23/13 at 08:05:28 Have you taken off the valve adjustment covers......and removed the front and back bolts that are located onder those covers?
Back to top	Someday I will be old......But not today! IP Logged

anebv8 Senior Member Offline SuzukiSavage.com Rocks! Posts: 280 Rangiora,New Zealand Gender:	Re: getting at the cam chain Reply #6 - 11/23/13 at 11:12:49 Dave wrote on 11/23/13 at 08:05:28: Have you taken off the valve adjustment covers......and removed the front and back bolts that are located onder those covers? yup,looked at the bolt chart verslagen1 posted,so all bolts are off.Will do the wrench on timing bolt he also suggested so should be drama free now
Back to top	Ago Solvo Intereo Puteus IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home