SuzukiSavage.com - Shorter cables for ryca

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Shorter cables for ryca

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Shorter cables for ryca (Read 49 times)

Fizzer YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 7 Gender:	Shorter cables for ryca 11/03/13 at 12:40:53 Hi folks, I'm looking for a part number for shorter clutch and throttle cables for my Ryca build. Does anyone have any advice? I can see that some savages came with lower bars but can't find anyone who stocks the shorter cables which must have originally existed. Thanks Andy
Back to top	IP Logged

Gerry

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 121
Southwest Michigan
Gender: male

Re: Shorter cables for ryca
Reply #1 - 11/03/13 at 16:35:07

Hi Andy,
I'm not sure if there are any cables that are ready made at the correct length. Maybe someone will come along here on the forum with some cable from another make or model that are the correct length with the correct ends.
Looking ahead at my Ryca CS-1 build I was thinking that I would maybe contact Motion Pro (Google them) and see what some custom cable would cost. In addition there is a local independent motorcycle shop that I think will modify my stock Savage cables to my specs.
Gerry

This message was posted using Google Chrome on a system using Linux Mint 17 Mate

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18096 Camp Springs, Kentucky Gender:	Re: Shorter cables for ryca Reply #2 - 11/04/13 at 03:12:26 I built my own cables using the kits from Vehnill. It is easy, as long as you know how to solder steel cable......it has to be acid core flux and not rosin core. http://venhillusa.com/ Speed and Sport also will make custom cables for you. http://www.speedandsport.com/index.php/parts/controls/cables-custom/
Back to top	Someday I will be old......But not today! IP Logged

Gerry

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 121
Southwest Michigan
Gender: male

Re: Shorter cables for ryca
Reply #3 - 11/04/13 at 06:02:33

Dave wrote on 11/04/13 at 03:12:26:

I built my own cables using the kits from Vehnill. It is easy, as long as you know how to solder steel cable......it has to be acid core flux and not rosin core.
http://venhillusa.com/

Speed and Sport also will make custom cables for you.
http://www.speedandsport.com/index.php/parts/controls/cables-custom/

Thanks for that VenhillUSA link Dave. Looks like a great source for making your own cables.
Gerry

This message was posted using Google Chrome on a system using Linux Mint 17 Mate

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home