Crich422
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 43
Colorado Springs, CO
Gender:
|
So my buddy that I got my Savage from got a kit from BCB, this included a new rear fender and a new tail light (but no blinkers). Well he had the old rear fender but when he took it off he just dumped it without taking the old wires out of it (the female end of the connector), so he could wire up the new tail light to the old connection (the male end). Now the video that BCB sent is great, it shows you how to wire everything up... except you need the old wire connectors to finish it.
My question is: do I need the female end to wire it up, or can I just snip the connector off (the male end, yikes!) and hard wire the light together? Now I know I wont be able to take the connection apart if I do it this way, but why would I want to take it apart anyways unless I got a new wiring harness? It should still be the same wires that get connected together, so I dont see it being too hard of a job. But I wanted to ask about it here first.
Also, my blinkers dont work at all, I found the right wires that were in the BCB video (Im pretty positive) but they did not make my test light turn on. Could this be the hand control thats not working or the electrical system? The horn works, if thats any help.
Has anybody else gotten the BCB kit and know what I mean? Thanks everybody!!
|