SuzukiSavage.com - Remove exhaust to remove side to check clutch rod?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Remove exhaust to remove side to check clutch rod?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Remove exhaust to remove side to check clutch rod? (Read 46 times)

Joe F Junior Member Offline SuzukiSavage.com Rocks! Posts: 85	Remove exhaust to remove side to check clutch rod? 09/25/13 at 18:53:55 Do I have to remove the exhaust / pipe to pull the side cover off? I think I need to do a clutch push rod change and am trying to figure out how much other stuff has to come off.
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28846 Tucson Az Gender:	Re: Remove exhaust to remove side to check clutch Reply #1 - 09/25/13 at 19:43:20 Yup...
Back to top	Ludicrous Speed !... ... ... IP Logged

Serious Thumper
2005 No Login

Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male

Re: Remove exhaust to remove side to check clutch
Reply #2 - 09/25/13 at 19:49:21

2 minutes, 5 if you stop for a smoke and a beer. 10 if you follow the instructions and don't have air/electric tools. 2 funny looking bolts, 2 regular nuts, 2 funny looking capped nuts. Once the brake side foot control is out of the way, the muffler nuts pulled off and the header bolts taken out, the whole pipe just rotates up and slips forward.

In theory. I took an angle grinder to mine and swapped on a small glasspack and custom tailpipe.

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home