SuzukiSavage.com - Want to Bob my 09 s40

Jeff Jopling

Junior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 65

Want to Bob my 09 s40
09/02/13 at 10:37:03

So Long story short, I have an 09 s40 and want to bob it. I really have no clue where to even start really. I was assuming seat and rear fender. Is it best to due a Ryca Bob kid or a bluecollar bobbers kit. Or should I try and find the parts else where and do everything on my own?
Secondly I want a bobber but I also want to try and fashion some big ammo cans (deeper than 50 cal cans) into hard bags. Considering the bags normally mount to the rear fender and with a shorter fender do any of you have opinions on how I could accomplish the mounting for hard bags?

Basically any advice on how to bob this bike out would be appreciated.

Thanks

Back to top

IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28651
Tucson Az
Gender: male

Re: Want to Bob my 09 s40
Reply #1 - 09/02/13 at 11:35:23

I'm guessing that you mostly just want to make your bike really low in the back?...

To me,.. "bobbing a bike, is reducing it to it's minimal complication and weight,... so, adding giant steel bags is kinda' antithetical to bobbing it...

I think you can lower it, by finding shorter shocks or hardtailing it with solid struts,.. but you will probably need a pretty sturdy fender to support the weight of those bags... so a tiny "bobber" type fender might not be in the cards...
Hacking on the stock fender is possible but it tends to look a bit ratty...
Side mounting the license plate can visually reduce the size of the rear fender...
Maybe start there?... Huh

...

Ohhh!... and lose those chrome head covers... (I hate those things!)... Grin

...

Back to top

Ludicrous Speed !... ... Huh

...

IP Logged

Jeff Jopling Junior Member Offline SuzukiSavage.com Rocks! Posts: 65	Re: Want to Bob my 09 s40 Reply #2 - 09/02/13 at 11:41:06 Yeah, I understand what your are saying so perhaps i should have said. I want a minimalist looking bike with the exception of hard ammo can bags haha. Yeah I really want the short fender and at a mimimum a single seat so I'm not sure what I will do. hmm
Back to top	IP Logged

hotrodbobber Junior Member Offline SuzukiSavage.com Rocks! Posts: 54	Re: Want to Bob my 09 s40 Reply #3 - 09/02/13 at 11:57:37 ive used a 30mm ammo boxe, didnt want something to big but gives you an idea
Back to top	DSC_0023small.jpg IP Logged

botticelli

Junior Member

Offline

Custom Savage Build
Coming!

Posts: 66
Boston

Re: Want to Bob my 09 s40
Reply #4 - 09/02/13 at 11:59:19

If you go with a hard tail... you could mount the ammo cans right to the struts / frame on the sides of the rear wheel.

That will keep the fender out of the equation and let you go with whatever size you like.

Looking at the hardtail option from ryca, it would probably be easier to work with, and offer more mounting options, over adding struts to the stock setup.

Back to top

Four wheels move the body, two move the soul!

IP Logged

hotrodbobber Junior Member Offline SuzukiSavage.com Rocks! Posts: 54	Re: Want to Bob my 09 s40 Reply #5 - 09/02/13 at 12:00:29 the bike
Back to top	DSC_0024small.jpg IP Logged

Jeff Jopling Junior Member Offline SuzukiSavage.com Rocks! Posts: 65	Re: Want to Bob my 09 s40 Reply #6 - 09/02/13 at 16:49:15 hotrodbobber wrote on 09/02/13 at 12:00:29: the bike This is exactly the look I want to go with. Still softtail but with the ammo cans. I would probably want 20mm so they are a little bigger though.
Back to top	IP Logged

WD

Serious Thumper
2005 No Login

Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male

Re: Want to Bob my 09 s40
Reply #7 - 09/02/13 at 18:03:43

20mm cannon shell cans dwarf Knuckle/Pan/Shovel FL rear fenders. You may not want to run them on a mini-bike like the LS650/S40.

Even standard sized Saddleman Desperado semi rigid bags are too large for a stone stock Savage, let alone a cut down. I use them on my 98, which runs an FL solid rear fender...

...yes, the chrome sidemount headlight adapter is the rear fender primary mount.

... it is very easy to go overboard on your bag size, even wiih the full rear fender, this is about the max you want to run. And yes, the fishtail pipe IS the secondary rear fender mount, via a VN800 rear reflector bracket.

Solo seat is long gone, it sucked. Dixie brand from Jireh or Fog Hollow, or Canyon Run (same company, different brothers running different divisions, kind of like Lowes and Home Depot)... Roll Eyes

Back to top

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Want to Bob my 09 s40 Reply #8 - 09/02/13 at 19:35:50 Mounting bags to the swing arm increases unsprung weight. Imagine what happens inside there. Not a place for a 6 pakk..
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

hotrodbobber Junior Member Offline SuzukiSavage.com Rocks! Posts: 54	Re: Want to Bob my 09 s40 Reply #9 - 09/03/13 at 02:34:11 this how i mounted mine
Back to top	DSC_0025small.jpg IP Logged

PerrydaSavage Serious Thumper Alliance Member Offline Riding "The Rock"! Posts: 3522 Republic of Newfoundland Gender:	Re: Want to Bob my 09 s40 Reply #10 - 09/04/13 at 09:36:41 Am LOVIN' the look of that No. 32 Bobber!! Well done!
Back to top	Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes! IP Logged

greenmonster Senior Member Offline Hellooooo Nurse! Posts: 420 Vancouver BC Gender:	Re: Want to Bob my 09 s40 Reply #11 - 09/04/13 at 15:31:00 Hotrodbobber, Do you find that you scrape those containers? I would like to set something like that up but I scrape my pegs more often than my wife would like and I don't want to scrape anything else.
Back to top	IP Logged