SuzukiSavage.com - Flames

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Flames

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Flames (Read 102 times)

swedishbiker Full Member Offline SuzukiSavage.com Rocks! Posts: 119 Växjö Sweden Gender:	Flames 07/29/13 at 07:18:43 I have always been a flame fan. I found a picture of a HD, I copy the tank to my bike, close enough in design What paint can be used on the original paint? I don't need to make a new paint yet, it's still good. Just put on flames.
Back to top	flame.jpg IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18101 Camp Springs, Kentucky Gender:	Re: Flames Reply #1 - 07/29/13 at 07:52:19 I am not sure what kind of paint you have available in Sweden.....but the stock paint is a base coat/clear coat system using a catalyzed paint. You can probaby use any paint over the top without any problems. You will have to scuff up the clear coat to remove the gloss wherever you want the new paint to adhere properly and not peel.
Back to top	Someday I will be old......But not today! IP Logged

swedishbiker Full Member Offline SuzukiSavage.com Rocks! Posts: 119 Växjö Sweden Gender:	Re: Flames Reply #2 - 07/29/13 at 08:18:01 I should have write that I have been a car painter in younger years. But that back in 1980 s. But the paint today is not the same stuff back then Bike's from 1993, so it may have paint that is alike those I did use.
Back to top	IP Logged

swedishbiker Full Member Offline SuzukiSavage.com Rocks! Posts: 119 Växjö Sweden Gender:	Re: Flames Reply #3 - 07/29/13 at 09:59:07 I found that I have 3x1 liter Permacron that is still good but no hardener maybe I can get that still. If o, I can paint the bike many times So need some spray color for the flames.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home