SuzukiSavage.com - igniter plug wires!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › igniter plug wires!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

igniter plug wires! (Read 72 times)

Garrett

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 9

igniter plug wires!
06/16/13 at 19:43:30

alright guys, i been doing some cleaning up on my 1986 ls650's wires and getting a really basic wire harness on the bike. then i got to the igniter. and sure as crap if the wires didnt rot and fall out of the plug.
i am wondering if they make plugs with the wires to simply butt connect or if i have to try and solder them together..
any help would be awesome!

IP Logged

Garrett YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 9	Re: igniter plug wires! Reply #1 - 06/16/13 at 19:49:35 on edit: i found this link on here http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/FKWH/fkwh.... will the 8 position plug really work? and can i have a picture of where the wires plug into the plug? because every wire came out except 2 i am not to sure where the wires go!
Back to top	IP Logged

87 savage Full Member Offline Gone riding! Posts: 249 Maine Gender:	Re: igniter plug wires! Reply #2 - 06/17/13 at 02:01:21 Hey Garrett, here is the wiring diagram for your bike: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1294779818
Back to top	His: 1987 LS650F stock except for 98 engine, Dyna muffler. Hers: 2008 S40 with factory bags, windshield and sissybar. IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: igniter plug wires! Reply #3 - 06/17/13 at 07:31:35 I have purchsed and installed one of these connectors and it works great. You need to buy a couple to get up to the 20 dollar minimum. Also you will need a special crimping tool to crimp the connectors on the wires, I found it at radio shack for like 6 bucks.
Back to top	IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: igniter plug wires! Reply #4 - 06/23/13 at 20:13:56 Here's another good source I've used for the connector housings on our bikes: http://www.vintageconnections.com/ The owner is really nice and will help you learn how to do the crimps.
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home