SuzukiSavage.com - Turn signals

Doug Junior Member Offline SuzukiSavage.com Rocks! Posts: 95 Texarkana, AR Gender:	Turn signals 05/20/13 at 18:55:30 ...I bought some new turn signals which I am attempting to install. I need help from step one. I don't know how to remove the stock ones.
Back to top	"Can't do + won't do = don't do. Can do + will do = do do." xD IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18092
Camp Springs, Kentucky
Gender: male

Re: Turn signals
Reply #1 - 05/21/13 at 07:10:59

Front or rear?

The turn signals are held in by screws that are in the side of the mount, and they can be very tight or corroded and hard to remove. The front turn signal wiring is connected in the headlight bucket. The rear turn signal wiring is run through the heavy chrome sidde reinforcement pieces on each side of the fender.....and to access the wiring and remove it properly.....you need to remove those chrome pieces.

Back to top

Someday I will be old......But not today!

IP Logged

Doug

Junior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 95
Texarkana, AR
Gender: male

Re: Turn signals
Reply #2 - 05/21/13 at 11:40:43

Dave wrote on 05/21/13 at 07:10:59:

Front or rear?

The turn signals are held in by screws that are in the side of the mount, and they can be very tight or corroded and hard to remove. The front turn signal wiring is connected in the headlight bucket. The rear turn signal wiring is run through the heavy chrome sidde reinforcement pieces on each side of the fender.....and to access the wiring and remove it properly.....you need to remove those chrome pieces.

Ah, I see. Thanks for the help.

Back to top

"Can't do + won't do = don't do. Can do + will do = do do." xD

IP Logged