Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Re: clutch not fully disengaging
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Re: clutch not fully disengaging (Read 45 times)
sesamestreet
Full Member
Offline
Posts: 122
Mississauga
Gender:
Re: clutch not fully disengaging
04/23/13 at 21:31:28
What can be done to free up some slack in the clutch cable? I feel the clutch is being engaged right as i start pulling the lever, and when i let go, it never goes all the way out.
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: clutch not fully disengaging
Reply #1 -
04/23/13 at 21:43:41
Id need more info to understand what you need.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
verslagen1
YaBB Moderator
ModSquad
Online
Where there's a
will, I want to be
in it.
Posts: 28889
L.A. California
Gender:
Re: clutch not fully disengaging
Reply #2 -
04/23/13 at 22:24:22
There's an adjustment knob on the lever and on the case.
Back to top
Versey's Place
Tech Section Index
IP Logged
sesamestreet
Full Member
Offline
Posts: 122
Mississauga
Gender:
Re: clutch not fully disengaging
Reply #3 -
04/23/13 at 22:33:51
should the arm at the side of the case be moving during "free play"? it moves evenly with the lever before i feel any resistance.
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: clutch not fully disengaging
Reply #4 -
04/23/13 at 22:39:27
If you can grab the lever on the engine & swing it thru the arc, the clutch throwout is busted.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
sesamestreet
Full Member
Offline
Posts: 122
Mississauga
Gender:
Re: clutch not fully disengaging
Reply #5 -
04/23/13 at 22:57:47
no i can't do that, it's impossible to pull. that arm does move at the slightest pull of the clutch lever, but there's still a gap the size of a nickel's width before i feel any resistance, approximately. and when i let go, the clutch lever goes back but not all the way, it stops leaving that nickel-width gap.
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: clutch not fully disengaging
Reply #6 -
04/23/13 at 23:00:19
You want that little gap. It means the cable is TRuly not holding the clutch any at all.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
sesamestreet
Full Member
Offline
Posts: 122
Mississauga
Gender:
Re: clutch not fully disengaging
Reply #7 -
04/23/13 at 23:03:07
ok that works out well then! thanks
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/02/24 at 07:25:17
›
General Category
›
Rubber Side Down!
› Re: clutch not fully disengaging
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.