SuzukiSavage.com - Re: clutch not fully disengaging

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Re: clutch not fully disengaging

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Re: clutch not fully disengaging (Read 45 times)

sesamestreet Full Member Offline Posts: 122 Mississauga Gender:	Re: clutch not fully disengaging 04/23/13 at 21:31:28 What can be done to free up some slack in the clutch cable? I feel the clutch is being engaged right as i start pulling the lever, and when i let go, it never goes all the way out.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: clutch not fully disengaging Reply #1 - 04/23/13 at 21:43:41 Id need more info to understand what you need.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28889 L.A. California Gender:	Re: clutch not fully disengaging Reply #2 - 04/23/13 at 22:24:22 There's an adjustment knob on the lever and on the case.
Back to top	Versey's Place Tech Section Index IP Logged

sesamestreet Full Member Offline Posts: 122 Mississauga Gender:	Re: clutch not fully disengaging Reply #3 - 04/23/13 at 22:33:51 should the arm at the side of the case be moving during "free play"? it moves evenly with the lever before i feel any resistance.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: clutch not fully disengaging Reply #4 - 04/23/13 at 22:39:27 If you can grab the lever on the engine & swing it thru the arc, the clutch throwout is busted.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

sesamestreet Full Member Offline Posts: 122 Mississauga Gender:	Re: clutch not fully disengaging Reply #5 - 04/23/13 at 22:57:47 no i can't do that, it's impossible to pull. that arm does move at the slightest pull of the clutch lever, but there's still a gap the size of a nickel's width before i feel any resistance, approximately. and when i let go, the clutch lever goes back but not all the way, it stops leaving that nickel-width gap.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: clutch not fully disengaging Reply #6 - 04/23/13 at 23:00:19 You want that little gap. It means the cable is TRuly not holding the clutch any at all.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

sesamestreet Full Member Offline Posts: 122 Mississauga Gender:	Re: clutch not fully disengaging Reply #7 - 04/23/13 at 23:03:07 ok that works out well then! thanks
Back to top	IP Logged

Pages: 1

« Home