SuzukiSavage.com - indicators not working and it's freezing cold!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › indicators not working and it's freezing cold!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

indicators not working and it's freezing cold! (Read 77 times)

strang

Senior Member

Offline

Posts: 387
london
Gender: male

indicators not working and it's freezing cold!
02/12/13 at 14:12:42

I don't have a garage at the moment so any repairs will be on the street and I live in London and it's freezing. Last night the indicators (all of them) suddenly didn't work and then came back and then only flashed once and now tonight they don't work at all.
Wondered if people could help me find the most likely culprit so that I don't have to spend hours out there in the cold.
is it the switch?
the flasher?
the fuse? (wouldn't this shut off more than just the indicators?)
help much appreciated
mike

scrambler build: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1420917964/15

IP Logged

RidgeRunner13 Serious Thumper Offline haulin' the groceries! Posts: 649 Mustang Island, Texas Gender:	Re: indicators not working and it's freezing cold! Reply #1 - 02/12/13 at 14:44:35 Most likely the flasher. The oem flasher went bad on all 3 Savages I've owned. I always replace them with an automotive electronic type & never have had another one go bad.
Back to top	Wind me up & watch me run, I ain't never had too much fun! IP Logged

strang Senior Member Offline Posts: 387 london Gender:	Re: indicators not working and it's freezing cold! Reply #2 - 02/13/13 at 05:40:32 cheers Ridge - tomorrow I'll bung in an led flasher I have on hand. I know it will affect flash rate but hopefully it will see me through the cold snap.
Back to top	scrambler build: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1420917964/15 IP Logged

strang Senior Member Offline Posts: 387 london Gender:	Re: indicators not working and it's freezing cold! Reply #3 - 02/15/13 at 11:39:36 Crimped/soldered a couple of new connectors onto the existing wiring and bunged in the flasher box and I'm flashing again. Flash is a little bit slow with an led box but works well enough for now. So if all indicators stop working and maybe intermittently at first - it's the flasher box. done
Back to top	scrambler build: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1420917964/15 IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home