Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
What is the concensus on the headlight rattle (Read 47 times)
Dooley
YaBB Newbies
*
Offline



Posts: 42
Palm Harbor, FL
Gender: male
What is the concensus on the headlight rattle
02/08/13 at 10:54:28
 
I have a real bad buzz in my head light. I have read a few different fix's people have done to fix it from foam tape, gasket sealer and electrical tape.

What is the consensus on what is the best fix?
Back to top
 
 
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28668
Tucson Az
Gender: male
Re: What is the concensus on the headlight rattle
Reply #1 - 02/08/13 at 11:04:10
 
I don't think there is a consensus,...
...that's why there's so many different things used...  Grin..
Basically, you just want to fill the gap in the hooky claw at the top... duct tape, whatever...
Back to top
 
 

Ludicrous Speed !... ... Huh...
  IP Logged
Dooley
YaBB Newbies
*
Offline



Posts: 42
Palm Harbor, FL
Gender: male
Re: What is the concensus on the headlight rattle
Reply #2 - 02/08/13 at 11:17:42
 
Serowbot wrote on 02/08/13 at 11:04:10:
I don't think there is a consensus,...
...that's why there's so many different things used...  Grin..
Basically, you just want to fill the gap in the hooky claw at the top... duct tape, whatever...



What is the "hook claw"? I read references to it but I do not recall seeing a picture pointing it out. I even looked at the parts guide and was not to sure what was meant by it. Is it something I will know it when I see it?

Thanks
Dooley
Back to top
 
 
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28668
Tucson Az
Gender: male
Re: What is the concensus on the headlight rattle
Reply #3 - 02/08/13 at 11:38:21
 
Serowbot wrote on 01/31/13 at 23:07:47:
Remove screws at 7 and 4,... on the bucket... then turn the ring 10 degrees, to release the tongue at 12 o'clock(tongue/claw/lip)...
Lens and bezel ring will pop out...
Screws on the bezel, are for aiming...




Back to top
 
 

Ludicrous Speed !... ... Huh...
  IP Logged
Dooley
YaBB Newbies
*
Offline



Posts: 42
Palm Harbor, FL
Gender: male
Re: What is the concensus on the headlight rattle
Reply #4 - 02/08/13 at 11:46:42
 
Serowbot wrote on 02/08/13 at 11:38:21:
Serowbot wrote on 01/31/13 at 23:07:47:
Remove screws at 7 and 4,... on the bucket... then turn the ring 10 degrees, to release the tongue at 12 o'clock(tongue/claw/lip)...
Lens and bezel ring will pop out...
Screws on the bezel, are for aiming...



http://suzukisavage.com/yabb2.2/Attachments/Removing_Headlight_Screws.png



Thanks again I am sure it will come together when I see it.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/30/24 at 15:28:40



General CategoryRubber Side Down! › What is the concensus on the headlight rattle


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.