SuzukiSavage.com - engine mount rod

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › engine mount rod

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

engine mount rod (Read 71 times)

Jockesavage YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 14	engine mount rod 02/04/13 at 03:02:05 whats the diameter and lenght on the rods holding the foot controls and engine?
Back to top	IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: engine mount rod Reply #1 - 02/04/13 at 18:45:08 If you're talking about the lower-front motor mount bolt area, that hollow "rod" is 0.64" OD (plus or minus 0.05") and about 11 7/16" long (plus or minus 1/8"), with the length being measured between the inboard edges of the thick chrome foot peg brackets. As measured on mine (see signature block). IHTH!
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home