SuzukiSavage.com - changing bulb on headlilght

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › changing bulb on headlilght

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

changing bulb on headlilght (Read 86 times)

Steampowered Boy YaBB Newbies Offline Deny me and be Doomed!! Posts: 37 Glendale, CA Gender:	changing bulb on headlilght 01/31/13 at 21:30:33 can someone confirm that the two screws on the ring of the headlight are to remove it to change the bulb and the two at "4 and 7" on the bucket are to aim it? It's just remove the lens and pull the bulb right? this is the first bike I've had that didn't have a sealed headlight
Back to top	How other people treat you is their dharma; how you react is yours. IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: changing bulb on headlilght Reply #1 - 01/31/13 at 23:07:47 Wait... Remove screws at 7 and 4,... on the bucket... then turn the ring 10 degrees, to release the tongue at 12 o'clock... Lens and bezel ring will pop out... Screws on the bezel, are for aiming... (going from memory here,.. but, pretty sure that's right)...
Back to top	Ludicrous Speed !... ... ... IP Logged

NorCalRider YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 47 SF, California Gender:	Re: changing bulb on headlilght Reply #2 - 02/01/13 at 09:42:55 Serowbot's directions are right on the mark. See the attached illustration from the owner's manual. Good luck.
Back to top	Removing_Headlight_Screws.png 1999, Black, Raptor petcock, K&N air filter, otherwise stock. 5,800 miles. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home