justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
& thats correct to a point, A proper for the job sized tip on the torch with a properly adjusted flame & some wet rags to halt the progression of the heat thru the metal can limit the size of the "wound" created by the brazing process. Considering the location & given the above mentioned caveats, I wouldnt hesitate to braze IF I had a torch but no MIG. If I had a MIG, Id do that,, I dont have a MIG, I DO, however, have a torch and a drawer full of brazing tips.,
|