Hi Everyone. I have extended my Foot Pegs out 50mm, I did this because I find myself having to hold my feet in while riding. I especially notice this with the forward controls, my feet would sit over the edge of the original foot peg length.

I also modified the brake peddle too by cutting off and welding another foot plate next to the original.

I was concerned with them dragging on the ground, As you can see they can bend back to allow for this. I have test ridden and my heel touches the ground first when laying it down in the corners as it did before the extension. I don't lay it down in the corners to much anyway especially on this machine.

Never occurred to me, but that makes sense. Sitting astride a bike, legs are spread a bit. Farther from the seat, wider the feet,,, natcherlee!
Good job, Again, on everything,, Well thot out, well executed, but you didnt make a science project out of it, like go hunting a way to make a 1 piece brake pedal head.

Have you considered a metal tab, folded & shaped, that would mount under the head of the peg bolts to make first contact with the road? Or are you just gonna keep the pegs off the road?  FWIW, one of mine has seen enough contact that it was splitting down the length on the bottom. I wired it back together. Working fine & the wire skids nicely. Ive had it laid over hard enough I had to pull my foot back some cuz the twist on my ankle & the pinch between peg & case was hurting,, These things Will lay on over.

It also allows me to clean easier.

justin_o_guy2 wrote on 01/20/13 at 11:50:50:

Yes I will put something there so it can scrape without too much damage.

Nicely done! Is that the stock exhaust pipe? Where did you get that muffler looks great...the flat black goes very well with that bright white paint.

Stock front end on an otherwise modded bike sticks out like a nun's habit at a wh0re house.  

Paint the sliders.