justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
The plug tool is good. Fits in there better than anything else I have, Yea, keep the screwdriver parts. IF a guy uses the 24 mm wrench & stuff from the kit to put the axle in THEN it may be good enough to pull the rear wheel, But, If a guy runs that axle up tight with a 1/2 impact w/ the air control valve set to wide open & theres 120 pounds in the tank? I wouldnt expect that pukey little wrench & sawed off cheater to but it loose, Once youve gotten over the "magic" of adjusting things on your bike you'll probably get tired of messing with that belt tensioner tool.Ive got many, many tools & I know where they are, down to which pair of pliers is where in the pliers drawer. Each one has its own spot. Punches arent quite as anal in their placement, Anyway, I couldnt tell ya if I even still have that brass tensioning tool. If ya lose it, dont run buy another one.. I dont understand why they even still make pliers of that basic design. Yes, I Have a set, standing on edge on the right side of the drawer, held in place by a small magnet, But, if I decided I needed more pliers & something had to go? First in line, baby! 13 pair in that drawer. & its a small drawer, Sorta say 1&1/2" tall, 8" wide ( or so), good ol Craftsman box from late 60's I spose..
FWIW, I went from Okay & working to OHHHH, MAN! I dont feel good while I was out in the shop last nite. Had a little over 100* on the thermometer this morning, Still got almost 100* & when Im sick & have a fever, I get REALLY chatty.. sorry. A fever really affects my behavior
|