Hello everyone.

Maybe this topic has already been discussed but i did not find the post about it.

Do you know if it's possible to install a rear disc brake?

My bike gets big laughs when I use the rear brake and the front isn't much strong!

Alternatively you know of bigger front discs?

Thank's!

Well, no! ^^

Simply pressing on the pedal, with superhuman strength, amounts to doing nothing.

No brakes!

The same on fronts.
Something more, but certainly anything that would take away from danger when needed.

1st check the adjustment, the pedal will bottom out on one of the mounting bolts if you have it adjusted to low.
2nd lube the cable
3rd total tear down

as jog said, not normal, back will lock up in a heart beat.

what pads you using and when was the last time you replaced them?
check your brake fluid, clear or brown?

I've haven't made them chirp, but pad material will certainly affect stopping power.

The 1st EBC pads I got were terrible, as you said, superhuman powers required, and super soft wore out faster than stock.

The brand I like are "X" brand, used to be claimed to be kevlar, but that's a trade marked name, so now just listed by it's generic name which pretty much is nondescript or sometimes 'organic'

Now, pretty much use anything cheap and organic, but those X brand are lasting forever, over 10k miles.