SuzukiSavage.com - Best Exhaust For Lancer Big Bore Kit

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Best Exhaust For Lancer Big Bore Kit

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Best Exhaust For Lancer Big Bore Kit (Read 101 times)

NicholasTanguma YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 33	Best Exhaust For Lancer Big Bore Kit 09/23/12 at 22:17:17 It seems to me the stock header will be way too restrictive for Lancer's big bore, stage 2 cam, and flatslide Mikuni, even using a free flowing muffler. As far as I know the only larger bolt-on offering is the Raask drag pipe. But am I wrong? What's the best exhaust for a big bore kit? Do I have to go custom fabricated, perhaps?
Back to top	IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28644
Tucson Az
Gender: male

Re: Best Exhaust For Lancer Big Bore Kit
Reply #1 - 09/23/12 at 23:20:53

I'd use the same Harley shorty that the rest of us use...

If you're looking for max. HP,... then go to a more open pipe,.. but you'll quickly loose torque-band and end up with a finicky throttle'd bike...

The Harley shorty will take full advantage of the extra cubes, and still retain a comfortable torque-band for street riding...

Ludicrous Speed !... ... Huh

...

IP Logged

Oldfeller--FSO Serious Thumper ModSquad Offline Hobby is now "concentrated neuropany" Posts: 12671 Fayetteville, NC Gender:	Re: Best Exhaust For Lancer Big Bore Kit Reply #2 - 09/24/12 at 05:51:52 +1 to what Serowbot said
Back to top	Former Savage Owner IP Logged

rfw2003 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1108 Yantis, TX	Re: Best Exhaust For Lancer Big Bore Kit Reply #3 - 09/24/12 at 08:00:49 I do believe he's asking about a bigger diameter Header pipe, not muffler. In this case I would have to refer to a post Lancer did saying that with the big bore/high compression kit and larger cam he was saying a 1.5" ID to a 1.6" ID header. As far as bolt on headers raask is the only one I've seen. R.F.
Back to top	1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler IP Logged

CalisOsin Senior Member Offline Rather die, than live down on my knees. Posts: 297 Orange County, Ca Gender:	Re: Best Exhaust For Lancer Big Bore Kit Reply #4 - 09/24/12 at 14:26:19 If you're looking for more flow, I'd start with porting the exhaust.
Back to top	'97, k&n airfilter, bcb pipe, custom leather seat, monoshock, custom bars IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home