Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Highway peg extenders (Read 243 times)
BOBD
Full Member
***
Offline



Posts: 170
Blacklick, Ohio
Gender: male
Highway peg extenders
09/18/12 at 08:42:28
 
   
This is what I did. I extended my highway pegs out 4" with stainless 1/4"  steel bar and stainless steel bolts. Could have gone to 5 or 6", but only did 4". It's fine for me. If you have really long legs you may want to go to 6".
Back to top
 
« Last Edit: 09/18/12 at 11:21:11 by BOBD »  
  IP Logged
Pine
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1280
Mississippi, USA
Gender: male
Re: Highway peg extenders
Reply #1 - 09/18/12 at 10:04:06
 
Nice!
I just got my engine guards.. cant wait to try it out.
Back to top
 
 
  IP Logged
BOBD
Full Member
***
Offline



Posts: 170
Blacklick, Ohio
Gender: male
Re: Highway peg extenders
Reply #2 - 09/18/12 at 11:30:08
 
 These are my 6" extenders. Because the engine guards are angled I had angle the extenders outward to get them level. If I had a way to bend them that would be better, but since I only have a 31" inseam so they work fine for me.     Found a way to bend the extender, A sledge hammer and a bench vice. The front wheel looks like it is close, but there is plenty of room.
Back to top
 
« Last Edit: 09/20/12 at 03:44:28 by BOBD »  
  IP Logged
BOBD
Full Member
***
Offline



Posts: 170
Blacklick, Ohio
Gender: male
Re: Highway peg extenders
Reply #3 - 09/26/12 at 10:07:31
 
 Just modified the pegs to have a heel rest. They both fold up.  I used some Buddy Footpegs by Bikemaster. Got them for $10 from here: http://www.cruisercustomizing.com/buddy-footpegs-10mm/part/BM-171250
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
04/21/14 at 05:13:13



General CategoryTechnical Documents/Reference › Highway peg extenders


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.