SuzukiSavage.com - Cant get these progressive 12.5s on?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Cant get these progressive 12.5s on?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Cant get these progressive 12.5s on? (Read 225 times)

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Cant get these progressive 12.5s on? Reply #15 - 07/20/12 at 23:22:30 Blasted Progressives are always difficult to deal with. Id look for some Libertarians,,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10663 Oklahoma Gender:	Re: Cant get these progressive 12.5s on? Reply #16 - 07/21/12 at 04:18:34 justin_o_guy2 wrote on 07/20/12 at 23:22:30: Blasted Progressives are always difficult to deal with. Id look for some Libertarians,,
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10663
Oklahoma
Gender: male

Re: Cant get these progressive 12.5s on?
Reply #17 - 07/21/12 at 04:23:42

j wrote on 07/20/12 at 19:21:07:

Is there a way to rotate the whole exhaust out a little? Loosen header bolts abd what else? Rotate the whole thing to give me an inch inside it?

Of course; loosen remove the bolt/s holding the muffler to the muffler mount bar; remove the nuts holding the heat shield next to the right side foot peg/controls and pull the heat shield off, and then loosen the header bolts; then the exhaust will rotate.

12.5" will go on without having to compress the shocks after the other stuff is out of the way and you lift the rear of the bike up. A m/c jack is very helpful in doing this.

IP Logged

Savage_Rob

Serious Thumper
Alliance Member

Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male

Re: Cant get these progressive 12.5s on?
Reply #18 - 07/24/12 at 10:06:49

j wrote on 07/20/12 at 18:12:24:

Already had the guard removed. I did remove the footpeg and it still wont go. I had searched like all the posts about 12.5 and made my own about it. Everyone said they fit, guess everyone had swapped exhaust already. In answer to my last post, 12 or 12.5:
12.

Josh

Hmmm, never thought about that. Yes, I had already swapped out to a Mac muffler.

IP Logged

j Junior Member Offline SuzukiSavage.com Rocks! Posts: 71 Gender:	Re: Cant get these progressive 12.5s on? Reply #19 - 07/24/12 at 16:20:19 wouldn't be a problem if the local harley people would get off their thrones to look in the garage for a dyna take-off for poor little metric me.
Back to top	2005 S40. Dyna muffler. 12.5 Prog Shocks. Socket risers. IP Logged

SaVaGeEaRL Full Member Offline SuzukiSavage.com Rocks! Posts: 106 Georgetown, KY Gender:	Re: Cant get these progressive 12.5s on? Reply #20 - 07/24/12 at 17:52:32 eBay usually has several for cheap... Got mine there for 20 bux...
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home