SuzukiSavage.com - VM36 carb install

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › VM36 carb install

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

VM36 carb install (Read 392 times)

wambr Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 610 Russia, Samara Gender:	Re: carburator problem Reply #15 - 07/01/12 at 10:55:09 may be problem is not in carb. chek the vacuum line of your carb and petcock. if it's ok, check the needle valve in carb.
Back to top	Yeah, it's not bigtwin, but it is the best half of it IP Logged

suzukis YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 19	Re: carburator problem Reply #16 - 07/01/12 at 11:02:25 Guys, I am not clear with the jet advice. There has only one jet(kind a pin) for the throttle and I see only one more screw jet on the side except the idle. I am really virgin about this problems . Which one I have to change and how to find it. The summer is over guys, I like to ride the bike. :'(
Back to top	IP Logged

rfw2003 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1108 Yantis, TX	Re: carburator problem Reply #17 - 07/01/12 at 11:04:42 you have to pull the bowl off the carb, to re-jet it. The jets are on the inside of the carb. R.F.
Back to top	1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler IP Logged

suzukis YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 19	Re: carburator problem Reply #18 - 07/01/12 at 11:16:46 The bowl?? Is this the bottom on the carb or the top?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: carburator problem Reply #19 - 07/01/12 at 11:26:27 If this is not a stock carb, you really need to say so or you're going to get the wrong advise.
Back to top	Versey's Place Tech Section Index IP Logged

rfw2003 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1108 Yantis, TX	Re: carburator problem Reply #20 - 07/01/12 at 11:30:54 Here is a pic of a VM style carb. Part number 21 is the pilot jet and part number 36 is the main jet. Those will be the primary ones you will be changing for tuning.
Back to top	1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler IP Logged

suzukis YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 19	Re: carburator problem Reply #21 - 07/01/12 at 11:47:55 Thanks. Now I have to find the new one jets and to now what I am looking for right? I am sorry guys I don't know what to do. I dont like to badder you but i like to ride the bike.
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: VM36 carb install
Reply #22 - 07/01/12 at 16:15:00

LANCER wrote on 06/23/12 at 03:30:25:

suzukis wrote on 06/22/12 at 21:24:52:

hello, so i posted earlier on the week about getting help on how to install new VM36 carb. I have few issues.
1- My throttle cable would not fit in the new carb. what kind of throttle cable do i need.
2- the new carb i got is complete do i have to change jets or anything.(I thought its made for the bike?)
I have been searching on this site and cannot find any post to help me with the issue for throttle cable.
Cheers

Dude, I have all of the parts you need for converting the VM carb to work on your bike.
I have been putting together complete carb kits for many years and have done the work to gather the correct parts to make it work.
Send me a direct email to savage.s40@gmail.com

Here's the guy to talk to.

Versey's Place
Tech Section Index

IP Logged

SinglesGoinSteady

Full Member

Offline

SuzukiSavage.com
Rocks like Bon
Scott!

Posts: 130
From Seattle, now in Savannah.
Gender: male

Re: VM36 carb install
Reply #23 - 06/12/13 at 15:43:21

Lancer, since you're keen to give advice, how about you tell me what jets I should try on my Ryca. With the VM36 installed as you mailed it to me, it idles, but, as soon as I crack the throttle it dies. I can very sloooowly rev it up, but, if I crack it, she dies. I guess I'm going to have to pull it apart and see what jets are in it since you don't know what you sent to me.

http://rycatracker.blogspot.com/

IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home