SuzukiSavage.com - Raptor Petcock

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Raptor Petcock

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Send Topic

Print

Raptor Petcock (Read 394 times)

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Raptor Petcock Reply #15 - 06/15/12 at 20:25:47 bikertrash wrote on 06/15/12 at 20:21:40: What do you guys recommend for plugging the vaccuum port on the carb? That port is for providing vacuum, not fresh air to the intake. If you don't plug it, it will throw off your jetting. anything, rtv on a screw, rubber caps, wooden stake, yada yada.
Back to top	Versey's Place Tech Section Index IP Logged

Scott.aust Junior Member Offline SuzukiSavage.com Rocks! Posts: 53 Brisbane Queensland Australia Gender:	Re: Raptor Petcock Reply #16 - 06/15/12 at 20:33:57 i think they only sell square wooden stakes that are 3 foot long locally, will i have to modify it to fit ? ( NO not stupid, YES sence of humour ! )
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Raptor Petcock Reply #17 - 06/15/12 at 20:46:41 Scott.aust wrote on 06/15/12 at 20:33:57: i think they only sell square wooden stakes that are 3 foot long locally, will i have to modify it to fit ? ( NO not stupid, YES sence of humour ! ) learning to fit a square peg in a round hole - $0.89 lol - priceless
Back to top	Versey's Place Tech Section Index IP Logged

Scott.aust Junior Member Offline SuzukiSavage.com Rocks! Posts: 53 Brisbane Queensland Australia Gender:	Re: Raptor Petcock Reply #18 - 06/15/12 at 20:56:00 i was thinking a little rubber cap should do the trick.
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28623 Tucson Az Gender:	Re: Raptor Petcock Reply #19 - 06/15/12 at 21:32:36 Rubber caps I used, kept disintegrating... I found a tapered screw that threaded in snug, and covered it with a rubber cap... ...for pretty... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

SaVaGeEaRL Full Member Offline SuzukiSavage.com Rocks! Posts: 106 Georgetown, KY Gender:	Re: Raptor Petcock Reply #20 - 06/16/12 at 09:40:07 I've been an auto tech for 26 years. I have several of those little rubber caps that come on wheel cylinder bleeder screws. They fit perfectly on the carb.
Back to top	IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: Raptor Petcock Reply #21 - 07/29/12 at 20:22:17 Here's what's plugging that vacuum port on my bike: I squirted some RTV into the tube before folding it. The tube was the OEM vacuum tube. Been on there for several years now....didn't cost hardly anything (just whatever a small blob of RTV and two small zip ties cost). IHTH!
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

Pat YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 9	Re: Raptor Petcock Reply #22 - 08/05/12 at 13:28:28 I recently did the Raptor Petcock and it works great, I bought mine from PowerSportsPlus.com for around $19 Plus shipping. I used a vaccum cap you can get at any parts store. Pat
Back to top	IP Logged

Boule’tard Serious Thumper ModSquad Offline Master of the Obvious Posts: 1620 Austin TX Gender:	Re: Raptor Petcock Reply #23 - 08/05/12 at 14:39:40 Scott.aust wrote on 06/15/12 at 20:33:57: i think they only sell square wooden stakes that are 3 foot long locally, will i have to modify it to fit ? You have a lathe, right? No problem.
Back to top	That which can be destroyed by the truth should be. - P.C. Hodgell IP Logged

Pages: 1 2

Send Topic

Print

‹ Previous topic | Next topic ›

« Home