justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Yea, seems to me the slot & head on the mix screw are a lot smaller. Id get a screwdriver that fits that slot REAL good, I mite even take a file & cut a small groove in the driver face, one on each side, on the edge thats got to Bite, just above the end of the driver, the upper edge of that groove needs to be just above the top of the slot. Ive done that on a screw on a gun,, I won, also, if the edges are getting "fuzzy", take a pin punch & with a very light "hammer",, extension, whatever,,tap the edges of the slot very carefully back into place. The carb isnt mounted solid, so you may be ahead pulling it. Smacking the handle of a screwdriver, seating it in the slot, shocks the plug,,never a bad I dea. YOu may be able to win with it on the bike. If the driver slips, you feel the carb push away,, pull it.
|