Hi Guys. Sorry for not posting my progress so often
The engine RPM goes up but not the speed of the bike. That is correct.
After reading just a part of the linked thread (facepalm) i decided to try switching the push rod for a longer one. The problem now seems worse that before i think. Need to do some more testing before im sure.
I must admit that i have not checked the clutch lever against the markings on the clutch cover som im not sure where it stands at this point. Not even sure if it lever is in the marked operating zone (feels like a noob but due to little time this whent a bit fast). The lever got a good slack. It moves up and down like 0,5 -0,7 cm when i pull it with my hand. I will sure slow things down. I will check status of the clutch lever position first thing when i get back home from work today, and let you know!
I have changed oil 2 times after i bought the bike this spring from the prevoius owner. I bought the oil from the local Suzuki dealer 10w 40 so it should be the right one. Dont know what the previous owner added to the bike.
I did change the springs and friction plates but not the steele plates. Mistake?
If it is not a clutch problem what else could it be?? any tips what to look
for?
Anyways. Thx for helping out and again sorry for late response!