SuzukiSavage.com - Cleaning cooling fins/engine for paint

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Cleaning cooling fins/engine for paint

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Cleaning cooling fins/engine for paint (Read 53 times)

Kyle

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 40
St. Charles, IL
Gender: male

Cleaning cooling fins/engine for paint
06/05/12 at 10:25:36

What's the best way to go about cleaning the cooling fins on the engine and the rest of the engine case? I want to clean some of the dirt/road debris and possibly paint the engine black.

Should I use a degreaser and a wire scrub brush? Should I be worried about damaging the fins? Any other areas of concern? Besides the obvious possibility of water damage.

IP Logged

Spamy

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 224

Re: Cleaning cooling fins/engine for paint
Reply #1 - 06/05/12 at 14:45:27

I use a chem resistant plastic wire brush and some heavy duty chemical based cleaner. Its more like carb cleaner than anything else. It works well, then Ill follow with a water wash with like a car wash mix.

I try to stay away from anything too caustic as it will leave the aluminum cloudy once it dries. Some water based cleaners that have a bit of caustic solution in them will do that.

IP Logged

Spamy Full Member Offline SuzukiSavage.com Rocks! Posts: 224	Re: Cleaning cooling fins/engine for paint Reply #2 - 06/05/12 at 14:48:11 Oh yea, as far as water damage, you really only need to worry about water getting in the breather on top, the carb and least of all the tailpipe as far as the motor itself. I would consider removing the battery if your going to really go at it.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home