splash07 wrote on 06/14/12 at 06:22:51:yeah it definitely wont let the wheel turn when I pull the lever and release.
I think there are two options for this to happened:
1. Pressure not being released by the Master Cylinder, to check this just quickly open the bleeder to see if there's pressure, after releasing the pressure you should be able to turn the wheel or
2. The piston being stuck, maybe dirt build up, or the piston grabbing something when pushed back in, and that is causing the piston to be jammed, for this I will take the caliper out, and push the piston out (using air or something like it, don't grab it with pliers or anything that can damage the piston walls)
Completely clean the piston and the caliper from build ups, and assemble back together, I use a special grease for this called Versalube, or vaseline if Versalube is not available, don't like to use regular grease.
Maybe someone else has another suggestion for you!
Good luck