Donate!
Welcome, Guest. Please Login or Register :: View Members
SuzukiSavage.com › General Category › Rubber Side Down! › Dyna Muffler adapter question
(Moderators: verslagen1, Dave, Serowbot) ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Dyna Muffler adapter question (Read 85 times)
Jacob
Junior Member
**
Offline

2012 Suzuki S40 650

Posts: 60
Ford City, PA
Gender: male
Dyna Muffler adapter question
05/30/12 at 10:56:41  
I am installing a HD Dyna FXD this weekend on my 2012 S40. I'm pretty sure I'll need a adapter. Anyone know what size between the header and muffler I'll need?

Thanks
Back to top
 
 
  IP Logged
Greg
Serious Thumper
*****
Offline

Molon Labe

Posts: 1251
Southeast PA, uSA
Gender: male
Re: Dyna Muffler adapter question
Reply #1 - 05/30/12 at 11:17:30  
Dyna side is 1.75"OD. LS650 side is bigger than 1.625ID. I know this because that is what I purchased. Eyeing up the adapter, I would say 1 11/16"ID but I couldn't find one. I purchased some exhaust tape from Autozone and put 2 layers on the head pipe. So far so good. Make sure you cut slits in the Dyna muffler.

http://www.autozone.com/autozone/accessories/VersaChem-72-sq-in-Tiger-Patch-m...
Back to top
 
 
2002 Savage.
WWW   IP Logged
Jacob
Junior Member
**
Offline

2012 Suzuki S40 650

Posts: 60
Ford City, PA
Gender: male
Re: Dyna Muffler adapter question
Reply #2 - 05/30/12 at 12:30:29  
What exact adapter will I need with the muffler tape? It will need to be the correct O.D. and I.D.
Back to top
 
 
  IP Logged
Greg
Serious Thumper
*****
Offline

Molon Labe

Posts: 1251
Southeast PA, uSA
Gender: male
Re: Dyna Muffler adapter question
Reply #3 - 05/30/12 at 13:09:08  
I didn't use an adapter with the muffler tape. The ID of the Dyna muffler is 1 3/4" (1 6/8" for the fractionally-challenged  Grin ). The OD of the Savage pipe is a little bigger than 1 5/8". I just wrapped 2 layers of tape, slid on the muffler and clamped it down.
Back to top
 
 
2002 Savage.
WWW   IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28644
Tucson Az
Gender: male
Re: Dyna Muffler adapter question
Reply #4 - 05/30/12 at 13:11:40  
Greg wrote on 05/30/12 at 13:09:08:
I didn't use an adapter with the muffler tape. The ID of the Dyna muffler is 1 3/4" (1 6/8" for the fractionally-challenged  Grin ). The OD of the Savage pipe is a little bigger than 1 5/8". I just wrapped 2 layers of tape, slid on the muffler and clamped it down.

Greg... you made that way too easy... Grin...

That's cheating,... Huh...
Back to top
 
 
Ludicrous Speed !... ... Huh...
  IP Logged
Greg
Serious Thumper
*****
Offline

Molon Labe

Posts: 1251
Southeast PA, uSA
Gender: male
Re: Dyna Muffler adapter question
Reply #5 - 05/30/12 at 16:30:06  
Serowbot wrote on 05/30/12 at 13:11:40:
Greg wrote on 05/30/12 at 13:09:08:
I didn't use an adapter with the muffler tape. The ID of the Dyna muffler is 1 3/4" (1 6/8" for the fractionally-challenged  Grin ). The OD of the Savage pipe is a little bigger than 1 5/8". I just wrapped 2 layers of tape, slid on the muffler and clamped it down.

Greg... you made that way too easy... Grin...

That's cheating,... Huh...


Now that I rode it hard for a while I developed a slight leak. I am just gonna smoosh muffler mud on the seam.
Back to top
 
 
2002 Savage.
WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›


« Home

 
« Home
SuzukiSavage.com
09/24/24 at 06:22:42



› General Category › Rubber Side Down! › Dyna Muffler adapter question


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.