SuzukiSavage.com - carburetor/ jetkit install

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › carburetor/ jetkit install

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

carburetor/ jetkit install (Read 59 times)

mayor4u YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 49	carburetor/ jetkit install 05/28/12 at 09:39:04 was wondering if anyone has tried to rotate the carb 90 deg (while still on the bike) to install a jet kit, looks like if you remove a cable or two, and a few hoses you could loosen the hose clamps on the rubber boots and rotate the carb 90 degrees to access the float bowl, and the vacuum slide without entirely removing the carb?
Back to top	IP Logged

arteacher

Serious Thumper

Offline

Ride as if your
naked and invisable!

Posts: 2581
London ontario
Gender: male

Re: carburetor/ jetkit install
Reply #1 - 05/28/12 at 09:59:29

I think I read where that's been done. You might have to take the top off first though.
You can take the bowl off without rotating the carb. It's a b!tch getting the Philips head screws out the first time, but if you replace them with Allen heads it's a breeze the second time.
Just remember to put a rag over the starter so little things don't fall down under it.

white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt

IP Logged

ralfyguy Serious Thumper Offline Posts: 932	Re: carburetor/ jetkit install Reply #2 - 05/28/12 at 10:31:06 I tried rotating mine, but the top of the frame is in the way.
Back to top	IP Logged

mayor4u YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 49	Re: carburetor/ jetkit install Reply #3 - 05/28/12 at 14:12:29 ok guys.... point taken, thanks for the heads up!
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home